User's Manual

17
www.ninjakitchen.com
English
USING THE CHOPPING BLADE ASSEMBLY
1 Holding the Chopping Blade Assembly by the shaft,
place it onto the star-shaped post inside the bowl.
Ensure that the attachment fits on the star-shaped
post and that it is standing straight.
2 Add the ingredients and secure the bowl lid onto
the bowl. (Fig. 19)
3 Plug the power cord into the electrical outlet and
press the power toggle up (
) to turn the power
“On”.
4 Select the speed that best suits your needs. Pulse
ingredients for even chopping by pressing down
on the “Start/Stop/Pulse” toggle in short intervals.
Press up on the “Start/Stop/Pulse” toggle to run
the unit continuously.
NOTE: When making dips or sauces, set the
variable speed on a low setting (1-3) and press the
“Start/Stop/Pulse” toggle up.
NOTE: Please refer to “Speed Settings & Uses”
chart for suggested uses and speeds.
5 When you have reached your desired consistency,
stop the appliance by pressing the “Start/Stop/
Pulse” toggle up and wait for the blade to stop
turning.
6 Press the power toggle (
) down to turn the power
off.
7 To remove the lid, press the release button and
turn the lid counter-clockwise and lift the lid off.
Hold the bowl with one hand and lift the lid with
the other for best leverage. Turn the bowl counter-
clockwise and then lift off the base.
(Fig. 20, Fig. 21)
CAUTION: Use care when handling the
removable Chopping Blade Assembly. Blades
are sharp, handle with caution. Always handle
by the shaft.
Fig. 19 Fig. 22
USE
/
/
USING THE DOUGH BLADE
1 Place the motor base on a clean, dry, level surface
such as a counter or table top. (Fig. 22)
2 Secure the bowl onto the motor base.
3 Holding the dough blade by the shaft, place it onto
the star-shaped post inside the bowl. Ensure that
the attachment fits on the star-shaped post and
that it is standing straight.
4 Add the ingredients and secure the bowl lid onto
the bowl.
NOTE: For best results add dry ingredients first and
then add wet ingredients.
5 Plug the power cord into the electrical outlet and
press up on the power toggle (
) to turn the power
“On”.
6 IMPORTANT: Use only the “DOUGH/DISC” setting
when mixing dough or using either disc. Press up
on the Start/Stop/Pulse Toggle to start the unit.
7 When finished making dough, press up on the
Start/Stop/Pulse Toggle to stop the unit. Remove
the bowl from the motor base. (Fig. 20, Fig. 21)
8 Press the power toggle (
) down to turn off the
unit.
NOTE: As a safety feature, the power light
will flash when the power toggle (
) is pushed
upwards if the lid or bowl are not installed
correctly. Then the lid and bowl are installed
properly and the toggle (
) is pushed up, the
power light will become solid, indicating the
unit is ready for use.
Dough &
P
r
ocessing
Fig. 20
/
Fig. 21
REMOVAL
USE