User's Manual

www.ninjakitchen.com

English

Assembly and Use for the Single Serve Cup

ASSEMBLY PULSE REMOVAL

Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13

ASSEMBLY PULSE REMOVAL

IMPORTANT: Make sure that the motor base is

plugged in for use.

1 Place the motor base on a clean, dry, level surface

such as a counter or table top.

2 Add ingredients to the single serve cup.

NOTE: Do not overﬁll! To avoid spilling, do not add

ingredients past the “Max” ﬁll line.

3 Place the single serve blade onto the cup and screw

it on tightly until you have a good seal.

(Fig. 9)

4 Turn the single serve cup upside down and place it

onto the motor base, aligning the tabs on the cup

with the motor base. (Fig. 10) Turn clockwise until

the cup locks in place, the unit is ready for use.

(Fig. 11)

5 Turn the Variable Speed Dial to the Single Serve

icon. The single serve cup only operates at one

speed regardless of which number is chosen on the

dial. Press down on the “Start/Stop/Pulse” toggle

in short intervals until you have reached your

desired consistency. (Fig. 11)

For best results, use short “PULSES”... Practice makes perfect!!

6 When you have reached your desired consistency,

turn the single serve cup counter-clockwise

(Fig. 12) and pull straight up to remove. (Fig. 13)

7 Turn the cup upright and remove the single serve

blade by twisting the blade assembly counter

clockwise.

8 Place the Sip & Seal

™

To-Go drinking lid onto the

single serve drink cup, screw on to seal and enjoy!

9 Make sure that the motor base is unplugged when

not in use.