Operation Manual, AirPrint Guide

5
AirPrint Guide
AirPrint Settings
AirPrint Settings
AirPrint (Print/Scan/Fax)................... Select these settings to use the AirPrint functions.
mDNS ................................................. Enable or disable mDNS. When mDNS is disabled, the machine will not appear
in the list of printers when AirPrint is used to print.
This setting is linked to [Network Setup] → [Services] → [mDNS Settings] →
[mDNS] in "Administrator Settings (administrator)" in "Web page".
IPP ...................................................... Specify whether or not the IPP port of the machine is enabled.
This setting is linked to [Network Setup] → [Security] → [Port Control] → [IPP] in
"Administrator Settings (administrator)" in "Web page".
IPP-SSL .............................................. Specify whether or not the IPP-SSL port of the machine is enabled.
This setting is linked to [Network Setup] → [Security] → [Port Control] →
[IPP-SSL] in "Administrator Settings (administrator)" in "Web page".
Service Name..................................... Set the name of the printer that appears in the application when AirPrint is used.
This setting is linked to [Network Setup] → [Services] → [mDNS Settings] →
[Service Name] in "Administrator Settings (administrator)" in "Web page".
Machine Location.............................. Enter the machine installation location information that is sent to the application
when AirPrint is used.
This setting is linked to [System Information] → [Machine Location] in "Web
page".
geo URI (RFC 5870)........................... Enter the geographic location of the machine.
Enter the location information in the format specified by the geo URI standard.
Default User Name for User Authentication ....... Set the initial value in the "User Name" when entering user
authentication information from the client terminal.
IPP Authentication
IPP Authentication ............................ Set enable/disable of IPP Authentication
User Name ......................................... Set the User Name with IPP Authentication.
Password ........................................... Set the Password with IPP Authentication.
Confirm Password ............................ Re-enter the character set in "Password" above.
Device Status..................................... Move to the [System Information] → [Device Status] in "Web page".
SSL Settings ...................................... Move to the "Administrator Settings (Administrator)" → [Network Setup] → [SSL
Settings] in "Web page".
Firmware Version
Information on the firmware is displayed.
To use with AirPrint when the machine’s user authentication function is used, disable [Disable Print by Inv. User] in "System
Settings (Administrator)" → [User Control] .