Operation Manual, Quick Start Guide
Table Of Contents
36
SYSTEM SETTINGS
WHAT YOU CAN DO IN THE SYSTEM SETTINGS
The following settings can be configured in system settings.
Some settings may not appear on the display of the machine, or in the Web browser on your computer. Some settings
may not appear due to the specifications of your machine and the peripheral devices that are installed.
5
Press the [OK] key and follow the instructions in the setting screen.
Several settings will have checkboxes in front of them. To enable a function (make a checkmark appear),
press the [OK] key. To disable the setting, press the [OK] once again to remove the checkmark. To
configure a setting that has a checkbox, go to step 6.
6
To use another setting for the same mode, select the desired setting with the
[] or [] key.
To use a setting for a different mode, press the [BACK] key ( ) and select the desired mode. To exit the system
settings, press the [CA] key.
Menu Overview
System Settings Configure the main settings for the machine such as date settings and paper tray settings. You
can configure the following settings.
Change Admin PIN Use this function to change administrator PIN code.
Initial Setting The default settings for operation of the machine can be
configured.
Copier You can select copy settings.
Printer You can select print settings.
Scanner You can select scanner settings.
Fax You can select fax settings.
Network You can select network settings.
User Control User Control is used to configure settings for user
authentication.
Device Control These settings are used to configure settings for hardware
functions of the machine.
Operation Setting These settings are used to configure various settings related to
the operation panel.
Energy Save These settings are used to configure energy saving settings.
List Print This is used to print lists and reports that are only for use by the
administrator of the machine.
Auto Calibration By scanning the printed test pattern, tones can be
automatically corrected.
Security Settings The following settings are related to security.