Operation Manual, Troubleshooting

25
TROUBLESHOOTING
Misfeed in the fusing area B
1
Remove the misfed paper.
Be careful not to tear the misfed paper during removal.
The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or
injury.
• When removing misfed paper, do not touch or damage the transfer belt and the transfer roller.
• Be careful about unfixed toner on the misfed paper not to soil your hands or clothes.
2
If the misfed paper cannot be removed, remove
the paper by pulling it into the paper output
area.
Be careful not to tear the misfed paper during removal.
3
Close the side cover.
The message will be cleared and copying will be possible.
• When closing the side cover, press on the handle.
• If the paper was torn, make sure that no torn pieces remain in the machine.
• If the message does not clear, check again to make sure that no pieces of paper remain.