Operation Manual, Troubleshooting

27
TROUBLESHOOTING
MISFEED IN THE PAPER TRAY 1
Make sure that there is no misfed paper in the tray before pulling it out.
► MISFEED IN THE MACHINE
(page 23)
1
Open the side cover and remove the misfed paper.
► MISFEED IN THE MACHINE (page 23)
2
Lift and pull out the paper tray 1 and remove the misfed
paper.
Be careful not to tear the misfed paper during removal.
3
Push the paper tray 1 in completely.
Push the tray in completely.
4
Close the side cover.
The message will be cleared and copying will be possible.
• When closing the side cover, press on the handle.
• If the message does not clear, check again to make sure that no pieces of paper remain.