Operation Manual, User's Manual

4-2
FACSIMILE►BEFORE USING THE MACHINE AS A FAX
TO USE THIS PRODUCT CORRECTLY AS A
FACSIMILE
Several points must be kept in mind when using this product as a facsimile.
Please note the following.
Line connection
Be sure to use the provided telephone line
cord to connect the machine to a telephone
line socket. Insert one end of the telephone
line cord into the LINE socket on the left side
of the machine as shown. Insert the other end
of the telephone line cord into a telephone line
socket.
Insert the plug firmly until you hear a "click".
In some countries, an adapter is required to connect the telephone
line cable to the wall telephone socket, as shown in the illustration.
Setting the date and time and
programming your sender's name and
number
Before using the fax function, you must set the date and time and
program your sender's name and number in the machine. This
procedure is explained in POINTS TO CHECK AND PROGRAM
AFTER INSTALLATION (page 4-3) of this manual.
Lithium battery
The date and time are protected by a lithium battery in the
machine.
• When the battery dies, please contact your local Sharp dealer or authorised service representative for assistance in
disposing of this battery. The machine will not operate once the battery dies.
Please note
In the event of a thunderstorm, remove the power cord from the power outlet to ensure safety. Information will be
retained in memory even if the power cord is unplugged.
BEFORE USING THE MACHINE AS A FAX
• The fax function cannot be used on some models and in some regions.
• The fax function can be used when a facsimile expansion kit is installed on the BP-20C20/BP-20C25.
LINE socket
Clicks
For United
Kingdom
For Australia
For New Zealand
Wall socket
Adapter