Operation Manual, User's Manual

4-13
FACSIMILE►BASIC TRANSMISSION METHODS
SEARCHING FOR A PROGRAMMED DESTINATION
(USING THE [ADDRESS] KEY)
At the time of dialling, you can enter letters to search for a destination stored in a Speed Dial number, or Group dial.
1
Press the [ADDRESS] key ( ) and enter the search
letters (you can also skip entry of search letters and go
directly to the next step to display the first destination in
the address list).
Up to 10 of the following types of characters can be entered.
Upper case letters, lower case letters, numbers, special characters.
► CHARACTER ENTRY
(page 1-47)
2
Press the [OK] key and select the desired destination with the [ ] or [ ] key.
• The search results appear in the following order: upper case letters, lower case letters, special characters, and
numbers.
• If not all letters of the destination name appear, press the [READ END] key to display the full name. Press the [READ
END] key once again to return to the original screen.
• To cancel transmission while "Reading" appears or before the [READ-END] key ( ) is pressed, press the [C] or [CA]
key. To cancel a transmission job that is already stored, press the [FAX STATUS] key ( ) and cancel the job as
explained on Cancelling a fax transmission
(page 4-21).
• A job number (3 digits) appears in the display with "Read End" when transmission is performed. If you make a note of
this number after performing a broadcast transmission, you can use the number to check the results of the
transmission in the transaction report or activity report.
Key Words