Operation Manual, User's Manual

4-19
FACSIMILE►BASIC TRANSMISSION METHODS
HOW TO SELECT THE RESOLUTION
The resolution can be changed to match the text size of the original, and the original type, such as a photo. Select
"Resolution" in the right menu of the base screen of fax mode and press the [OK] key.
Standard
Select for an original with normal size text.
Fine
Select for an original with small text or detailed diagrams. The original will be scanned at twice the density
of "Standard".
Super Fine
Select for an original with intricate pictures or diagrams. A higher-quality image will be produced than with
the "Fine" setting.
Ultra Fine
Select for an original with intricate pictures or diagrams. Transmits the clearest image. Requires slightly
more time for transmission than the other resolutions.
Fine/Half Tone
S-Fine/Half Tone
U-Fine/Half Tone
Use for photo or shaded colour originals (colour documents, etc.). Transmits a clearer image than with
"Fine", "Super Fine" or "Ultra Fine" alone.
The transmission time is slightly longer when halftone is selected.
Resolution
Broadcast
Program
Orig. Size
Stand-by.
Auto
Memory
Cont
Standard
22 : 25SAT
OCT
• The factory default settings for the resolution and contrast are "Standard" and "Auto", respectively.
The default settings for the resolution and contrast can be changed in the system settings Set Res. Con.
(page 6-22).
When using the document glass to scan multiple original pages, you can change the resolution and contrast each time you
change pages. When using the auto document feeder, you cannot change the resolution and contrast after scanning has
started.
• Even if you send a fax at "Fine", "Super Fine" or "Ultra Fine", the receiving fax may not be capable of receiving and printing
the fax at that resolution.
• To cancel a resolution setting, press the [CA] key.