Operation Manual, User's Manual

1-14
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
PREHEAT MODE
This mode lowers the temperature of the fusing unit and makes the machine wait in low power consumption state.
Preheat mode will activate when the set duration of time elapses in waiting status without executing a job.
Compared to Auto Power Shut-Off Mode, the amount of energy saved is less and the wakeup time is shorter.
In preheat mode the display turns off. Normal operation automatically resumes when a key on the operation panel is
pressed, an original is placed, or a print job or fax is received.
ENTER AUTO POWER SHUT-OFF AFTER THE REMOTE
JOB
Printing or outputting received fax data in Auto Power Shut-Off Timer turns on the power, and then the machine returns
to Auto Power Shut-Off Mode immediately after completing the print job.
To set preheat mode:
In "System Settings (administrator)", select [Energy Save] → [Preheat Mode].
To set "Enter Auto Power Shut-Off after the Remote Job":
In "System Settings (administrator)", select [Energy Save] → [Enter Auto Power Shut-Off after the Remote Job].
1
L
L
H
L
Printed
Sleep mode
Print
Sleep mode
Fusing unit is turned
off
Fusing unit is turned
on
Fusing unit is turned
off