Operation Manual, User's Manual

1-16
BEFORE USING THE MACHINE►LOADING PAPER
IMPORTANT POINTS ABOUT PAPER
NAMES AND LOCATIONS OF TRAYS
THE DEFINITION OF "R" IN PAPER SIZE
To indicate the landscape setting, "R" is added to the end of the name of a paper size enabled for both landscape and
portrait settings.
APPLICABLE PAPER TYPES
This section describes paper types that can be used and those that cannot be used.
All types of paper other than plain paper are referred to as special media.
LOADING PAPER
Paper that can be set either in the portrait or landscape orientation Paper that can only be set in the
landscape orientation
A4, B5, 8-1/2" x 11" A3W, A3, B4, 12" x 18", 11" x 17", 8-1/2"
x 14", 8-1/2" x 13"
Paper set in the landscape orientation Paper set in the portrait orientation Can be placed only in the landscape
orientation
• Various types of paper are commercially available, some of which cannot be used on the machine.
Before using any paper, consult the dealer or nearest authorised service representative.
• The image quality and toner fusibility of paper may change due to ambient conditions, operating conditions, and paper
characteristics, resulting in image quality inferior to that of Sharp standard paper.
Before using any paper, consult the dealer or nearest authorised service representative.
• The use of non-recommended or non-usable paper may result in skewed feeding, misfeeds, poor toner fusing (the toner
does not adhere to the paper well and can be rubbed off), or machine failure.
• The use of non-recommended paper may result in misfeeds or poor image quality. Before using non-recommended paper,
check whether printing can be performed properly.
Tray 1
Tray 2
(when a 500-sheet paper feed tray
is installed)
Bypass tray
Tray 3 (when a stand/2x500 sheet paper
drawer is installed)
Tray 4 (when a stand/2x500 sheet paper
drawer is installed)
A4R
(8-1/2" x 11"R)
A4
(8-1/2" x 11")
A3
(11" x 17")