Operation Manual, User's Manual

5-27
SCANNER►SAVING IN USB MEMORY DEVICE
4
Press the [ADDRESS] key ( ).
5
Select "USB Memory Scan" using the
[ ] key, press the [OK] key.
6
Connect the USB flash memory to the
machine.
If a USB flash memory is inserted into the machine prior to step 4, the following screen will appear.
Instead of performing steps 3 and 4, you can select "Scan to the memory device" with the [ ] or [ ] key in the above
screen and press the [OK] key to select the USB flash memory as the destination.
7
Press the [COLOUR START] or [B/W START] key.
Scanning begins.
8
If you have another page to scan, change pages and then press the [COLOUR
START] or [B/W START] key.
Repeat this sequence until all pages have been scanned.
If no action is taken for one minute (the [COLOUR START] or [B/W START] key is not pressed), scanning
automatically ends and transmission begins.
9
When the final original page has been scanned, press the [READ-END] key
().
Open the document feeder and remove the document. When the original is removed or any key operation is performed,
the display returns to the base screen.
Address Book
USB Memory Scan