Operation Manual, User's Manual

6-11
SYSTEM SETTINGS►SYSTEM SETTINGS
Wireless (Infrastructure)
(This setting appears when a wireless LAN adaptor
is installed.)
This sets connection using wireless infrastructure mode.
Manual Input of SSID
Enter up to 32 half-width characters for the SSID.
• Setting of Security Type
Select the security type.
(None, WEP, WPA/WPA2-mixed Personal, WPA2
Personal)
• Setting of Encrypt
Select the encryption method based on the "Setting of
Security Type" setting.
(None, WEP, AES/TKIP, AES)
• Security Key Settings
Set the security key used for wireless connection.
Wireless (Access Point)
(This setting appears when a wireless LAN adaptor
is installed.)
This sets connection using wireless access point mode.
Setting of SSID
Enter up to 32 half-width characters for the SSID.
Security Settings
• Setting of Security Type
Select the security type.
(None, WEP, WPA/WPA2-mixed Personal, WPA2
Personal)
• Setting of Encrypt
Select the encryption method based on the "Setting of
Security Type" setting.
(None, WEP, AES/TKIP, AES)
• Security Key Settings
Set the security key used for wireless connection.
Device IP Address Settings
Set the IP address of the access point.
Channel Settings
Set the channel used for the access point.
Sending Output Settings
Set the transmission output of the access point.
Bandwidth Settings
Set the frequency band of the access point.
IP Addr. Distribution Range
Set the lease range and lease period of the IP address
used for the access point.
WEP 5 half-width numeric digits,
10 hexadecimal (64 bit) digits,
13 half-width numeric digits,
or 26 hexadecimal (128 bit) digits
WPA/WPA2
-mixed
Personal
8 to 63 half-width numeric digits or 64
hexadecimal digits
WPA2
Personal
WEP 5 half-width numeric digits,
10 hexadecimal (64 bit) digits,
13 half-width numeric digits,
or 26 hexadecimal (128 bit) digits
WPA/WPA2
-mixed
Personal
8 to 63 half-width numeric digits or 64
hexadecimal digits
WPA2
Personal