Operation Manual, User's Manual

6-13
SYSTEM SETTINGS►SYSTEM SETTINGS
Device Control
These settings are used to configure settings for hardware functions of the machine. To access one of these settings,
select "Device Control" in the mode selection screen, select the desired setting in the device control screen, and press
the [OK] key.
Document Feeder Detect Settings (BP-20C20/BP-20C25)
One of the 8 groups of standard original sizes shown below can be selected for detection by the original size detection
function.
Original Size Display Setting (BP-10C20)
Set the original sizes that appear in the original size specification screen.
Device Control
Document Feeder
Detect Settings
Paper Weight
Fusing Cleaning
Selections Detectable original sizes
AB-1 11" x 17", 8-1/2" x 14", 8-1/2" x 11", A3, A4, A4R, A5, B4, B5, B5R
AB-2 A3, A4, A4R, A5, B4, B5, B5R, 11"x17", 8-1/2"x11", 216 mm x 330 mm (8-1/2"x13")
AB-3 A3, A4, A4R, A5, B4, 11"x17", 8-1/2"x11", 216 mm x 330 mm (8-1/2"x13"), 8K, 16K, 16KR
AB-4 A3, A4, A4R, A5, B4, B5, B5R, 11"x17", 8-1/2"x11", 216 mm x 340 mm (8-1/2"x13-2/5")
AB-5 A3, A4, A4R, A5, B4, B5, B5R, 11"x17", 8-1/2"x11", 216 mm x 343 mm (8-1/2"x13-1/2")
Inch-1 11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, A4
Inch-2 11"x17", 216 mm x 330 mm (8-1/2"x13"), 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2", A3, A4
Inch-3 11"x17", 8-1/2"x13-2/5 (216 mm x 340 mm), 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2", A3, A4
Original Size
Display Setting