Operation Manual, User's Manual

6-14
SYSTEM SETTINGS►SYSTEM SETTINGS
Paper Weight
The temperature of toner fusing is controlled according
to the weight of the paper that is used.
Apply this setting to plain, recycled, punched,
pre-printed, letter head, and colour.
Select from 60g/m
2
- 79g/m
2
and 80g/m
2
- 105g/m
2
.
Fusing Cleaning
Use this function to clean the machine's fusing unit when
dots or other dirt appear on the printed side of the paper.
When this function is executed, "V" printed paper is
output and the fusing unit is cleaned.
Reg. Adjustment
If the printed colours shift out of position when you print
by Colour printing, you can adjust the print position of
each colour to reduce colour shifting.
Plain Paper Settings
In this machine, paper type is divided between plain
paper 1 and plain paper 2.
When printing on plain paper with a printer driver that is
not compatible with plain paper 1 and plain paper 2, you
can set which paper type to use for printing
Status Light Setting
Set the operation of the data notification indicator on the
machine. Select from "Pattern 1", "Pattern 2", or "Not
Use". For explanations of the patterns, refer to Data
notification indicator and error indicator (page 1-11).
Error Light Setting
Set the operation of the error indicator when an error
occurs on the machine. Select whether the indicator
lights or blinks depending on the error status, only blinks,
or is not used.
Blink Setting for Received Data
Set whether the data notification indicator blinks when
fax data has been received or received data is held.
• Be sure to use only paper that is in the same weight
range as the weight range set here. Do not mix in
other standard paper that differs from the set range.
• When settings are changed, the changes will take
effect after the machine is restarted. To restart the
machine, see TURNING ON THE POWER
(page
1-12).
If improvement is not noticed after the first time you
use the function, try executing the function again.