Operation Manual, User's Manual

6-17
SYSTEM SETTINGS►SYSTEM SETTINGS
List Print
This is used to print lists and reports that are only for use
by the administrator of the machine.
Select [List Print] to choose the list and the report you
want to print.
Auto Calibration
If the print tones are off, you can correct the tones. By
scanning the printed test pattern, tones can be
automatically corrected.
After the [OK] is selected and a test patch is printed, a
message appears prompting you to begin automatic
calibration. Place the test patch on the document glass
as shown below.
Lay copy paper (about five sheets) that is the same size
as the test patch on top of the placed test patch, gently
close the automatic document feeder, and select the
[OK].
Fax Settings Shows the current state of the system
settings, as well as the sender name,
sender number, polling passcode
numbers, and forwarding numbers.
Inbound
Routing
Shows the inbound routing settings for
routing received faxes on your network.
User Usage List Shows the communication time and
number of pages transmitted by each user.
Activity Report Shows a log of past communication
performed on the machine (date of
communication, name of other party, time
required, result, etc.).
Allow/Reject
Number List
Shows the stored fax numbers from which
reception in Allow/Reject Set
(page 6-27)
is allowed or blocked.
User Info. Print The user name, user number, paper used,
paper limits, and function permission
settings can be printed for each user.
If the tones are still off after "Auto Calibration" is
performed, repeating Auto Calibration may provide
improvement.
Align the upper left corner of the original with the
mark.