Operation Manual, User's Manual

6-19
SYSTEM SETTINGS►SYSTEM SETTINGS
Copier
These settings are used to enable various copy
functions. To access one of these programs, select
"Copier" in the mode selection screen, select the desired
setting in the copy settings screen, and press the [OK]
key.
ID Card Setting
The layout pattern for copying of the ID card can be
changed during the ID card copy process.
Refer to the illustration in ID CARD COPY
(page 2-19)
for the available layout patterns.
Card Shot Default
This setting is used to set the default dimensions that
appear when the card shot size entry screen is
displayed.
The factory default settings are 86 mm (3-3/8") for the
width (X) and 54 mm (2-1/8") for the length (Y).
Select X or Y and adjust the corresponding default value
with the [ ] or [ ] key.
Orig. Size Enter
Set the default original size for the document glass.
The paper size can be selected
AB type:
A3, B4, A4, A4R, B5, B5R, A5, A5R, B6R, A6R, Not
Specified
Inch type:
11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2",
5-1/2"x8-1/2"R, Not Specified
The factory default setting is “A4”.
Default Tray Set
This setting is used to set which tray is selected by
default.
Trays that appear for selection will vary depending on
the optional trays that have been installed.
The factory default setting is "Tray 1".
AutoSelect Tray Paper Supplied
This setting automatically selects the tray in which paper
was added.
The factory default setting is “Disabled”.
Auto PaperSelect
Select the auto paper selection setting.
When [On] is set, auto paper selection applies to all
trays. When [On (excluding Bypass Tray)] is set, auto
paper selection applies to all trays except the bypass
tray.
The factory default setting is “On”.
Paper Type of Auto PaperSelect
Set the paper types to which auto paper selection
applies.
• Plain paper 1 (factory default setting: enabled)
• Plain paper 2 (factory default setting: enabled)
• Recycled paper (factory default setting: disabled)
Default Exposure
This setting is used to select the original type and
exposure mode that is initially selected when the
[EXPOSURE] key is pressed.
Three exposure modes are available: "Text", "Txt/Prt
Photo" and "Photo".
Depending on the settings, set "Auto" or one of five
levels for the exposure.
Select the original type with the [ ][ ] keys, adjust the
exposure if needed with the [ ][ ] keys, and press the
[OK] key.
RotationCopy Set
Set whether or not Rotation Copy is used.
The factory default setting is “ON”.
Sort Auto Select
This setting is used to select the default output mode
when the document feeder is used for copying.
The initial factory setting is "Sort".
Auto Image
Set whether or not Auto Image is performed when the
paper tray (paper size) is manually selected.
The factory default setting is “Disabled”.
Limit Of Copies
This setting is used to set the limit for the number of
copies that can be set (and that can appear in the
display) for one copy job.
The factory default setting is "999 copies".
Copier
ID Card Setting
Card Shot
Default
Orig. Size Enter