Operation Manual, User's Manual

6-20
SYSTEM SETTINGS►SYSTEM SETTINGS
Printer
Settings related to the printer function can be configured.
Select the [Printer] to configure the settings.
Notice Page
Set whether a notice page is printed when printing does
not take place due to an error such as memory full.
Delete All Print Hold Data
This function deletes all print hold data that is held in the
machine.
The following data is excluded:
• A job that is currently being printed
• Print hold data that is in the process of being saved
Fax
System settings for the fax function are explained below.
List Setting
This setting is used to print lists showing current system
settings and other programmed information.
Select the [List Setting] to configure the settings.
Print Selection
This setting is used to select the conditions for printing
out transaction reports for normal transmission,
broadcast transmission, original print and reception.
Normally the settings indicated by shading
above are selected.
"Transmission", "Broadcast", "Original Image Print
Setting", or "Reception" can be selected.
• If you selected "Transmission", select "Always Prints",
"Error Only", or "Never Prints".
• If you selected "Broadcast", select "Always Prints",
"Error Only", or "Never Prints".
• If you selected "Original Image Print Setting", select
"Always Prints", "Error Only", or "Never Prints".
• If you selected "Reception", select "Always Prints",
"Error Only", or "Never Prints".
Printer
Notice Page
Delete All Print
Hold Data
Transmission Broadcast
Original Image
Print Setting
Always Prints
Always Prints Always Prints
Error Only Error Only Error Only
Never Prints Never Prints Never Prints
Reception
Always Prints
Error Only
Never Prints
"Original Image Print Setting" is used to have part of
the first page of the transmitted document printed on
the transaction report. This setting is not effective
when the transaction report is set to not print out.