Operation Manual, User's Manual

6-23
SYSTEM SETTINGS►SYSTEM SETTINGS
Quick On Line TX
This setting is used to select whether or not quick on-line
transmission (transmission while original pages are
being scanned into memory) takes place when a
memory transmission is performed.
If quick on-line transmission is disabled, transmission
will not begin until all original pages have been scanned
into memory.
Normally quick on-line transmission is enabled.
When this function is disabled, transmission will not
begin until all pages of the document have been
scanned. Note that this setting does not apply to manual
transmission. (See Storing transmission jobs (memory
transmission) (page 4-17).)
• Quick on-line is enabled and a checkmark appears in
the checkbox.
• If this procedure is performed when quick on-line is
enabled, the checkmark will be cleared and quick
on-line disabled.
Print Station # In Rcvd Data
This setting lets you select the position (inside or outside
the original image) of the date and sender's information
that are printed at the top of each fax page you send.
Normally outside the original image is selected. To have
your name and number printed inside the original image,
select "In Data".
For more detailed information on the position of each
setting, see INCLUDING SENDER INFORMATION ON
FAXES (OWN NUMBER SENDING) (page 4-47).
Address Review
You can specify whether a screen appears for
confirmation of the destination when sending a fax.
When the "Only apply to direct entry" checkbox is
selected, the Address Review screen only appears
when the fax number is entered with the numeric keys
or the [REDIAL] key.