Operation Manual, User's Manual

1-32
BEFORE USING THE MACHINE►HOW TO PLACE THE ORIGINAL
Allowed original sizes
When the original is a non-standard size, see the appropriate explanation below for the mode you are using.
► COPIER: "SPECIFYING THE SIZE OF THE ORIGINAL (page 2-12)"
► FAX: "BASIC PROCEDURE FOR SENDING FAXES (page 4-8)"
► SCANNER: "BASIC TRANSMISSION PROCEDURE (page 5-5)"
Allowed original weights
1-sided scanning: 50 to 128 g/m
2
(13 to 32 lbs Bond)
2-sided scanning: 50 to 105 g/m
2
(13 to 28 lbs Bond)
Thin paper(1-sided): 35 to 49 g/m
2
(9 to 13 lbs Bond)
To scan an original from 35 g/m
2
to 49 g/m
2
, use “Slow Scan Mode” in the Special Modes. Attempting to scan without
using “Slow Scan Mode” may result in misfeeding of the original.
2-sided scanning of the original will not take place when “Slow Scan Mode” is enabled.
Minimum original size Maximum original size
Standard size
210 mm (longitudinal) × 148 mm, or A5
5-1/2" (longitudinal) × 8-1/2" (transversal)
Non-standard size
(Minimum size that can be specified manually)
131 mm (longitudinal) × 140 mm (transversal)
5-1/8" (longitudinal) × 5-1/2" (transversal)
Standard size
297 mm (longitudinal) × 420 mm (transversal) or A3
11" (longitudinal) × 17" (transversal)
Non-standard size
(Maximum size that can be specified manually)
Copy mode/Scanner mode:
297 mm (longitudinal) × 432 mm (transversal)
11-5/8" (longitudinal) × 17" (transversal)
Fax mode:
297 mm (longitudinal) × 500 mm (transversal)
11-5/8" (longitudinal) × 19-5/8" (transversal)
1
Make sure that there is no original on the document glass.
2
Place the original.
Up to 100 sheets can be inserted.
After scanning is finished on the automatic document feeder,
remove originals from the original exit tray.
Align the edges evenly
and face them up
Insert to the end
Fit to the Original Size
Below the indicator line