Operation Manual, User's Manual
Table Of Contents
2-4
COPIER►BEFORE USING THE MACHINE AS A COPIER
SELECTING THE PAPER TRAY FOR
COPYING
To change the tray you want to use in order to use the bypass tray or tray 2 to 4 (if installed), select "Paper Select" in the
right menu of the base screen of copy mode, and press the [OK] key.
Press the [ ][ ] keys to select the tray, and press the [OK] key.
For detailed loading paper into the tray, see the
TRAY 1 (page 1-20), LOADING PAPER INTO THE BYPASS TRAY (page 1-24).
• If the selected tray runs out of paper during a copy job and there is another tray that has the same size and type of paper,
that tray will be automatically selected and the copy job will continue.
• If the "Ready to copy." message does not appear in the base screen of copy mode
If a list is being printed in the system settings, copying is not possible. Wait until list print finishes and then start copying.
• Changing the default tray setting
Change the default tray in [System Settings] → [Default Tray Set].
• Enabling or disabling auto paper selection
Select the setting in [System Settings] → [Copier] → [Auto PaperSelect].
When this setting is enabled, a tray with the same size of paper as the original will be automatically selected.
Paper Select
A4
A4
B5
[OK]: Set Completed
A4
A4
Ready to copy.
A4
1
A4
Exposure
100%
Orig. Size
Paper
Output
Program