Operation Manual, User's Manual

Table Of Contents

2-14

COPIER►BASIC PROCEDURE FOR MAKING COPIES

MAKING COPIES USING THE BYPASS TRAY

In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, and other special

media.

SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON

BYPASS TRAY

For detailed information on paper that can be loaded into the bypass tray, see "APPLICABLE PAPER TYPES (page 1-16)".

For precautions on loading paper into the bypass tray, see "LOADING PAPER INTO THE BYPASS TRAY

(page 1-24)".

Load paper into the bypass tray.

When you load paper in the bypass tray, "Paper Type Set" is displayed.

If paper is already loaded in the bypass tray and you want to change the paper size or paper type, Press the [SPECIAL

FUNCTION] key ( ), select "Paper Size Set" or "Paper Type Set", and press the [OK] key.

• When "Bypass Tray Settings" in "Paper Size Set" is disabled, "Paper Type Set" is not displayed automatically.

• When “Disable Paper Size Set” is enabled in the system settings, “Paper Size Set” does not appear.

Select the type of paper to be used in the bypass tray.

Select the paper type with the [ ][ ] keys. When finished, press the [OK] key.

To use an envelope

Select the envelope size to be used with the [ ][ ] keys, and press the [OK] key.

The envelope size is set. "Envelope" appears in the paper size field of the base screen.

Select the paper size used in the bypass tray.

Select the paper size with the [ ][ ] keys. If the paper size is a standard size, select

Paper Size, press the [OK] key, and specify the paper size.

The specified paper size appears in the paper size field of the base screen.

When pressing the [SPECIAL FUNCTION] key ( ) to set "Paper Size Set", the display

returns to the base screen by pressing the [OK] key.

Paper Type Set

Set Completed

Plain 1

Plain 2

Heavy Paper 1

Paper Size Set

B5R

A4R