Operation Manual, User's Manual

1-6
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
(19) [COMM. SETTING] key ( )*
This is used to switch between memory transmission and
direct transmission, and to switch between automatic
reception and manual reception.
► Transmission settings (memory transmission mode
and direct transmission mode) (page 4-15)
(20) [SPEED] key ( )*
This is used to dial by Speed dialling.
► TRANSMISSION BY AUTO-DIALLING (SPEED
DIALLING AND GROUP DIALLING) (page 4-12)
(21) [FAX STATUS] key ( )*
This is used to cancel a fax transmission or a stored fax
transmission.
► CANCELLING A FAX TRANSMISSION (page 4-21)
(22) [ADDRESS] key ( )
Used to search for address, numbers and other contact
information stored for auto dialling.
► SEARCHING FOR A PROGRAMMED
DESTINATION (USING THE [ADDRESS] KEY)
(page 4-13)
(23) [BACK] key ( )
Press to return the display to the previous screen.
(24) [LOGOUT] key ( )
Press this key to log out after you have logged in and
used the machine. When using the fax function, this key
can also be pressed to send tone signals on a pulse dial
line.
(25) Printer mode indicators
• DATA indicator ( )
Blinks when print data is being received. Lights steadily
during printing.
(26) FAX mode indicators ( )*
• LINE indicator ( )
Lights up when a fax is being sent or received.
• DATA indicator ( )
Blinks when a fax cannot be printed because there is
no paper or otherwise. Lights steadily when there is an
unsent fax.
(27) Data notification indicator
The indicator lights solidly or blinks to indicate the status
of a job.
(28) [SPEAKER] key ( )*
This is used to dial without lifting an extension phone
connected to the machine. (►page 4-16)
(29) [REDIAL/PAUSE] key ( )*
This is used to redial the last number dialled, and enter a
pause when entering a fax number.
► CONVENIENT DIALLING METHODS
(AUTO-DIALLING) (page 4-6),
(30) [DUPLEX] key ( )
Select the duplex copy/fax/scan mode.
(31) [READ-END] key ( )
When copying in sort mode from the document glass,
press this key when you have finished scanning the
original pages and are ready to start copying.
(32) Error indicator
Lights solidly or blinks to indicate the status of the error.
* The BP-10C20 does not have fax function key or indicators. The fax function key or indicators can be used when a
facsimile expansion kit is installed on the BP-20C20/BP-20C25.
(21)(20)(19)
(31)
(30)
(23)(22) (24) (25)
(29)
(28)(27) (32)
(26)