Operation Manual, Web Page Settings Guide

11
Web Page Settings
ABOUT THE WEB PAGES
(FOR THE ADMINISTRATOR)
In addition to the menus that appear for users, other menus that can only be used by the administrator appear in the
administrator Web pages.
A menu frame appears on the left side of the page. When you click an item in the menu, a screen appears in the right
frame that allows you to configure settings for that item. Settings that can only be configured by the administrator are
explained here.
(1) Information
Configure machine identification information for the status &
alert E-mail function.
► INFORMATION SETUP
(page 17)
(2) Passwords
To protect the Web site, the system administrator can establish
passwords. Enter a password that you would like to establish
and click the [Submit] button.
One password can be established for the administrator and
one password can be established for users.
► PROTECTING INFORMATION PROGRAMMED IN THE
WEB PAGE ([Passwords]) (page 14)
(3) Administrator Settings
Setting changes can be prohibited and interface settings can
be configured.
► ADMINISTRATOR SETTINGS
(page 15)
(4) Status Message
Configure parameters required for sending status messages,
such as destination addresses and time schedules.
► STATUS MESSAGE SETUP
(page 18)
(5) Alerts Message
Store destination addresses for alert messages.
► ALERTS MESSAGE SETUP
(page 18)
(6) Security
Unused ports can be disabled for greater security and port
numbers can be changed.
(7) Services
Configure information concerning the e-mail, DNS, SNMP,
Kerberos and mDNS system. For the settings of e-mail, see
SMTP SETUP
(page 17).
(8) Print Port
Configure settings for LPD, Raw, WSD and FTP print.
(9) LDAP
Configure settings for LDAP.
(6)
(3)
(4)
(5)
(8)
(7)
(9)
(1)
(2)