Operation Manual, Web Page Settings Guide
Table Of Contents
- TABLE OF CONTENTS
- ABOUT THIS GUIDE
- WEB PAGE
- ABOUT THE WEB PAGES (FOR USERS)
- CONFIGURING THE PRINTER CONDITION SETTINGS
- ABOUT THE WEB PAGES (FOR THE ADMINISTRATOR)
- CONFIGURING THE SCANNER CONDITION SETTINGS
- CONFIGURING SMTP, DNS AND LDAP SERVER SETTINGS
- PROTECTING INFORMATION PROGRAMMED IN THE WEB PAGE ([Passwords])
- ADMINISTRATOR SETTINGS
- E-MAIL STATUS AND E-MAIL ALERT SETTINGS
- MAIN SETTINGS ON THE WEB PAGE
15
Web Page Settings
ADMINISTRATOR SETTINGS
The administrator settings are used to prohibit changes to the [Condition Settings] and to configure interface settings.
• "Default settings"
: Select the setting for which you wish to prohibit changes.
• "Paper Weight": The temperature of toner fusing is controlled according to the weight of the paper that is used.
• "Interface settings"
: Enable monitoring of data sent to the network port and set restrictions.
CONFIGURING A SETTING IN THE ADMINISTRATOR
SETTINGS
ADMINISTRATOR SETTINGS
When "YES, NO" appears in the "Settings" column, "YES" is selected when a checkmark appears in the checkbox of the
item, and "NO" is selected when checkmark does not appear.
Default settings
1
Click [Administrator Settings] in the menu frame.
The "Default Settings" screen of the [Administrator Settings] will appear. If you wish to select a setting in the "Default
Settings" screen, go to step 3.
2
Click the desired setting, and make a selection for the setting in the screen
that appears.
See "ADMINISTRATOR SETTINGS (page 15)" for descriptions of the settings.
3
Click [Submit] to store the entered information.
Item Settings Description
Prohibit Test Page Printing YES, NO This setting is used to prohibit printing of a printer test page.
Disable Default Setting
Changes
YES, NO This setting is used to prohibit changes to the default condition settings.
A4/Letter Size Auto Change YES, NO When printing an A4 (8-1/2" x 11") size image, this setting allows 8-1/2" x
11" (A4) size paper to be used if A4 (8-1/2" x 11") size paper is not
loaded.
Enable Detected Paper Size
in Bypass Tray
YES, NO This is used to prohibit printing when the paper size specified for a print
job is different from the paper size inserted in the bypass tray.
Enable Selected Paper Type
in Bypass Tray
YES, NO This is used to prohibit printing when the paper type specified for a print
job is different from the paper type inserted in the bypass tray.
List Prints 1-Sided, 2-Sided
Print
This is used to prohibit printing when the paper type specified for a print
job is different from the paper type inserted in the bypass tray.