Operation Manual, Web Page Settings Guide

16
Web Page Settings
Paper Weight
Paper Type for Auto Paper Selection
Plain Paper Settings
Interface settings
Item
Settings
Description
Paper Weight 60 - 89 g/m
2
(16 - 23 lb)
90 - 105 g/m
2
(23+ - 28 lb.)
These are used to control the toner fusing temperature according to the
weight of the paper.
Item
Settings Description
Plain 1 Enable, Disable Select the paper types that will be selectable by auto paper selection.
Plain 2 Enable, Disable
Recycled Enable, Disable
Item Settings Description
Plain Paper Settings Plain 1, Plain 2 In this machine, paper type is divided between plain paper 1 and plain
paper 2.
When printing on plain paper with a printer driver that is not compatible
with plain paper 1 and plain paper 2, you can set which paper type to use
for printing.
Item Settings Description
I/O Timeout 1- 60 - 999 (sec) During reception of a print job, if remaining data is not received after the
time set here elapses, the port connection is broken and the next print job
is begun.
Emulation Switching Auto, PostScript,
PCL
Select the printer language. When [Auto] is selected, the language is
automatically selected from the data sent to the printer. Unless errors
occur frequently, do not change the setting from [Auto] to another setting.
Port Switching Method Switch at End of
Job, Switch after
I/O Timeout
Select the method for switching network ports.