Operation Manual, Quick Start Guide

12
BEFORE USING THE MACHINE
(1) Toner cartridge
This cartridge contains toner.
When the toner in a cartridge runs out, the cartridge of
the colour that ran out must be replaced
(2) Automatic document feeder
This automatically feeds and scans multiple originals.
Both sides of 2-sided originals can be automatically
scanned at one time.
► USING THE AUTOMATIC DOCUMENT FEEDER
(page 16)
(3) Document feeding area cover
Open this cover to remove an original misfeed.
This cover is also opened to clean the paper feed roller.
(4) Original guides
These guides help ensure that the original is scanned
correctly.
Adjust the guides to the width of the original.
(5) Document feeder tray
Place the original.
Originals must be placed face up.
► USING THE AUTOMATIC DOCUMENT FEEDER
(page 16)
(6) Original exit tray
The original is discharged to this tray after scanning.
(7) Fusing unit
Heat is applied here to fuse the transferred image onto
the paper.
(8) Right side cover
Open this cover to remove a misfeed.
(9) Paper reversing section cover
This unit is used for reversing paper when 2-sided
printing is performed. Open this cover to remove a paper
misfeed.
(10) The main power switch
Use this switch to turn on the power for the machine.
When using the fax or Internet fax functions, always keep
this switch in the " " position.
(11) Waste toner bottle
This bottle collects excess toner that is produced during
printing.
(12) Transfer belt
This belt takes the image formed with toner off the
photoconductive unit and transfers the image onto paper.
(13) Right side cover release lever
To remove a paper misfeed, pull and hold this lever up to
open the right side cover.
(14) External telephone line jack
When the fax function of the machine is used, an
extension phone can be connected to this jack.
(15) Telephone line jack
When the fax function of the machine is used, the
telephone line is connected to this jack.
(16) Power plug
(17) LAN connector
Connect the LAN cable to this connector when the
machine is used on a network.
Use a shielded LAN cable.
(18) USB port (A type)
This is used to connect a USB device such as a USB
memory device to the machine.
Supports USB 2.0 (Hi-Speed).
* Peripheral device. For more information, see the User's Manual.
(1)
(5)(3)(2)
(4) (8)
(10) (13) (15) (16)(14)(11) (12)
(9)(7)(6)
(17)
(18)
Facsimile expansion
kit (Option)