Operation Manual, Quick Start Guide

BEFORE USING THE MACHINE
29
USER AUTHENTICATION
When user authentication is enabled in settings mode, you must log in in order to use the machine. User authentication
is disabled in the factory default settings.
When you have finished using the machine, log out.
ABOUT AUTHENTICATION METHODS
There are three user authentication methods: authentication by user number, authentication by login name / password, and
authentication by quick authentication. Ask the system administrator of the machine for the information you need to log in.
Logout
When you have finished using the machine, log out. This helps prevent unauthorized people from using the machine.
AUTHENTICATION BY USER NUMBER
The following procedure is used to log in using a user
number received from the administrator of the machine.
When starting the machine, the login screen appears.
AUTHENTICATION BY LOGIN
NAME/PASSWORD
This method enables users to log in using a login name
and password received from the administrator of the
machine or the administrator of the LDAP server.
When starting the machine, the login screen appears.
AUTHENTICATION BY QUICK
AUTHENTICATION
This can only be used on the machine when carrying
out user authentication.
This method provides simple authentication for an administer
who has been previously registered on the machine.
1
4
7
5
8
6
9
2
0
3
C
User Authentication
Enter your
user number.
CA
Admin Login
OK
User Authentication
Enter login name and password.
Login Name
Password
Touch to input Log-in Name
Touch to Input Password
Login Locally
CA
Select from List
OK
Auth to
Quick Login
Exposure
Address Book
Auto
Original
Mixed Size Orig.
Resolution
Standard
Job Build
Slow Scan Mode
Heavy Paper Scan
Address Fax Number
LINE PRINTER
Job Status
Others
Preview
Speaker
Start
Scan Size
Auto Auto
reception memory
100%
A4 A4
100%
Send Size
Sending History
Call Search Number
Call Program
Call Registered settings
Direct TX
Verification Stamp
Send Same Image
as Fax Address
Easy
Scan
File Retrieve
CA
Logout
Admin