Setup Manual
EN 10
Part Names
Remote Control Unit
2
1
1 Signal transmitter
2 Operation buttons
Check the following before requesting repairs.
Problem Possible Solution
• Power is not turned on. • Check if the AC cord is connected properly and plugged securely into the
outlet.
• When the lamp is not lit, turn on the power using the power button on the
main body.
• An indication Temperature
or Temperature of Monitor
blinks, and power is turned off
automatically.
• The temperature of the Monitor has risen. Get rid of the causes of the
increased temperature (such as direct sunlight or hot air).
• Check if the Monitor is installed in a condition or location where the
temperature rise occurs easily. Do not cover the ventilation opening on the
back of the main body when installing.
• Frequently remove dust from internal equipment or ventilation opening if it
can be removed from the outside. For removing dust inside the equipment,
consult your dealer.
Troubleshooting