PRINTERS PARTS SUPER STORE 800/809-0841
X-Acto and Olfa X-ACTO KNIVES X-ACTO BLADES X2000 KNIFE NO. 11 BLADES Soft rubberized and contoured barrel makes knife comfortable and easy to grip. Safety cap fits on back of knife to prevent misplacing. Center-barrel blade release for safer Extremely sharp point for angle cutting and stripping. Made in USA. and easier blade changing. Unique anti-roll wedge. X2000 X-Acto X2000 Knife NO. 1 KNIFE Light duty knife with cap. Five inch aluminum handle complete with #11 blade.
Cutting Tools GENERAL GRAPHIC BLADE CENTER Buy high quality blades without the name brand and save! K1B These U.S. made 13 point snap-off blades feature a long-lasting ultra sharp edge. Replacement blades for K1, OLFA A, 180, 300, SVR, Federal Graphic #18 and #1800 knives and General Graphic K-1 knives. (Federal 1713) K2B These U.S. made 8 point snap-off blades are razor sharp and long lasting. Replacement blades for K2, OLFA L1, L2 and Federal #700 and #710 knives and General Graphic’s K-2 knife.
Layout Supplies #113 SWIVEL KNIFE BURNISHERS Light-weight, durable double-action knife that swivels free and easy for cutting arcs, curves, and circles. Ball bearing smooth action. Code: SK113 Knife SK113B Replacement Blade #44 PIN VISE HOLDER For fine work, scribing, retouching, stencil or perforation. Will hold drills up to 1/16” size. Pin retracts into handle when not in use.
Darkroom BRITE-LITE SAFELIGHT FILTER SLEEVE GOLD SAFELIGHT: Slips over any standard fluorescent tube and floods the plate room with safe, even, gold light. The new sleeve is safe for offset plates, all forms of room light handling films, all forms of room light proofing materials plus silkscreen films and emulsions, including printed circuit films and resists. The Gold Brite-Lite Filter Sleeve is safer, brighter and less expensive than standard yellow bulbs. Available in 24”, 48”, and 96” lengths.
Loupes -Magnifiers LINEN TESTER 12X INSPECTION LOUPE LT-1 Linen Tester gives clear, sharp definition. Has 1” x 1” metal base opening with 6 power magnification. High resolution coated optics make inspection of halftones and line copy a snap. This loupe has a triple lens, easy focusing plus a swing base for easy carrying. LT-30 magnifier is a plastic foldout magnifier featuring a 5x power 30 mm lens. The LT-30 contains markings in both inches and centimeters for easy measuring of small parts.
Pens FILM OPAQUE METAL PLATES General Graphic Lith-O-paquer II Red Opaque Pens are waterproof, smudge proof and lightproof. These silky smooth flowing pens feature a special formulation of UV absorbers from even the strongest light sources. The even-flowing marker nibs lay down a rapid-drying, thin red opaque film that doesn’t build up, creep, spread, chip or crack.
Scales and Rulers PROPORTIONAL SCALE GA-86 GRAPHIC ARTS RULER A scale to calculate the percentage of reductions and enlargements for camera or copier sizing. Available in two sizes. Code: PS-79 PS-80 6” 8” E SCALE Plastic ruler measures in inches and picas. Includes proofreader symbols, E Scale and screen tints in 10% increments. Size is 2” x 18”. Code: GA-86 POCKET RULER Stainless steel pocket ruler with clip. picas and inches. Size is 1/2” x 6”. Used to measure type size from 6 point to 100 point.
Masking MASTERLINE MASKING SHEETS MASTERLINE pre-ruled masking sheets are customized for specific press models and sizes, and include all reference margins, head margins, center lines, image areas, start of print lines, paper stops, and more. Code: Press: Size A.B. Dick MS-ABD360A MS-ABD375 MS-ABD360L MS-ABD9800 MS-ABD385 A.B. Dick 360 A.B. Dick 375 A.B. Dick 360L A.B. Dick 9800 Series A.B.
Ihara Densitometers COLOR REFLECTION DENSITOMETER LITHOCAM DOT METER Ihara Densitometers utilize advanced microputer technology to ensure superior performance and reliability. The densitometers have commands that are menu driven. The design is upgradeable so you can later increase the capability. Measuring range of density is from 0.00 to 2.500. These units will do approximately 4,000 measurements between charges.
Measurement Tools DIGITAL THICKNESS GAUGE Measuring Range: 0.600 In., 15 mm Minimum Measuring Range: 0 mm Resolution: 0.0005 In., 0.01 mm The PTG-D digital thickness gauge is both economical and highly accurate. It measures from 0 to 0.6 inches or 15 mm. Resolution is 0.0005 inches or 0.01 mm. Clear digital display. Code: PTG-D Digital Thickness Gauge POCKET THICKNESS GAUGE DOT INSPECTOR The Dot Inspector is the ideal tool to precisely see the various print media outputs.
Pantone * & D u s t B l a s t e r COLOR FORMULA GUIDE DUST BLASTER The FORMULA GUIDE is a necessary tool for graphic designers, pre-press professionals and printers. This twoguide set contains 1,114 PANTONE Colors on coated an uncoated stock with ink mixing formulas. The latest edition now includes an RGB icon indicating colors achievable on-screen. Colors that bear both the RGB and CMYK icons are ideal choices for designs that will span cross-media.
pH Testing PH TESTER CALIBRATION/BUFFER SOLUTIONS CHAMP PH TESTER: An economical pH pocket tester with manual 1 point calibration, Range: 0.0 to 14.0 pH and Accuracy: ±0.2 pH. The Champ is a combination of an electrode with an LCD where the measurement is displayed. pHep: An economical pH pocket tester with a Range: 0.0 to 14.0 pH, Accuracy: ±0.1 pH and a manual 1 point calibration. pHep+: Combines the pHep's characteristics with automatic temperature compensation (ATC) and calibration at 2 points.
Cleaners and Dust-Off LAS-CLEAN - EX CYLINDER CLEANER AND DESENSITIZER GLISTEN GLASS CLEANER Ideal solution for cleaning laser plates. Eliminates toning and provides sharper and brighter reproductions. Will not affect image. Specifically designed to cut clean up time at the end of press run. Apply on chrome rollers and cylinder. Prevents ink from sticking or building up. Removes other buildups easily. Keeps your camera and tables smudge free.
Sprayway and 3M RUBBER ROLLER CLEANER & REJUVENATOR LUBRICANT SILICONE FREE Returns life to ink-laden, hardened rollers and blankets. Removes glaze resulting from gum, friction, ink, coatings, oxidation and light embossing. Restores velvety-smooth surface. Lubricates, penetrates, displaces moisture, prevents rust. Fine, thin coat keeps parts operating smoothly. Silicone-free. LUBRICANT RELEASE AGENT Dual purpose agent for picture framers, graphic artists, and industrial applications.
Press Chemistry and Lubricants DUPLI-CLEAN SUPER DUPLI-CLEAN SPECIAL The fastest drying version of Dupli-Clean. Excellent cleaning power for quicker cleanups. Keeps roller and blankets like "new". Press wash formulated for small presses. Dries clean and evenly. Quick acting cleaning power lifts dirt from pores of blankets and rollers. Allows quick turnaround time on short runs. Safe flash point.
Plate Punches/Copy Check/Wedges OFFSET PLATE PUNCHES MODEL OP/25 punches pin bar plates up to 12 1/2" in one motion. Extended register guide permits punching wider sheets. 25 pins, 1/2" center to center. MODEL OP/36 punches plates up to 18" in one motion. Extended register guide permits punching wider sheets. 36 pins, 1/2" center to center. MODEL PM-25 PUNCHMASTER punches paper, polyester and metal plates. Punches 25 pins, 1/2" center to center.
Press Supplies CLEAN-UP SHEETS Two sided, heavy weight, high wet strength and absorbency, resists tearing. Package contains 100 sheets. Five packages per carton. CODE: PRESS/MODEL: SIZE: C-A360 C-A9800 A.B. DICK 360/367 A.B. DICK 9800 SERIES 11 1/16” x 18 5/8” PB 13” x 19 3/8” PB C-M1250 C-M1250W C-M1850 MULTI 1250, 2550 MULTI 1250W MULTI 1850 10 1/8” x 15 1/16” PB 11 1/16” x 18 1/8” PB 18 1/8” x 15 1/8” PB C-C15 C-C15S C-C17 A.T.F. CHIEF 15 A.T.F. CHIEF 15 A.T.F.
Scales PANTONE INK MIXING SCALE TRIPLE BEAM INK SCALE The PANTONE Formula Scale LC has been developed specifically for producing smaller mixes of PANTONE Color Inks. Available in metric only. Comes complete with set of weights. Holds a maximum of 5 pounds. The PANTONE Formula Scale LC has an enhanced weighing resolution of 0.1 grams, so accurate mixes of very small quantities can be achieved, from just a few grams, up to a maximum of 1,000 grams.
Ink Knives ROLL KNIFE INK KNIVES/SCRAPERS Code: 3S-1 1/2 3S-2 3S-3 3S-4 L x W (Blade): 3 1/2" x 1 1/2" 3 1/2" x 2" 4 1/8" x 3" 4 5/8" x 4" Stiff Ink Scraper Stiff Ink Scraper Stiff Ink Scraper Stiff Ink Scraper 3F-1 1/2 3F-2 3F-3 3F-4 3 1/2" x 1 1/2" 3 1/2" x 2" 4 1/8" x 3" 4 5/8" x 4 Flexible Ink Scraper Flexible Ink Scraper Flexible Ink Scraper Flexible Ink Scraper INK KNIVES Code: 900-4 900-6 900-8 900-10 900-12 L x W (Blade): 4" x 1 1/2" 6" x 1 5/8" 8" x 2 1/4" 10" x 2 7/8" 12" x 3 1/8" L x W
Printing Press Blankets PRINTING PRESS BLANKETS GENERAL GRAPHIC 3-PLY BLANKETS Code A350 A360 A360-11 A375 A9800 A385 Press A.B. DICK 350 A.B. DICK 360 A.B. DICK 360 11” A.B. DICK 375 A.B. DICK 9800 A.B.
Padding Presses PAD ABOUT PADDING PRESS This versatile unit maximizes shop space and pad production. The Pad About pads up to 10,000 11” wide sheets. Convenient rotating table eliminates the need to lift paper stacks. Stand allows for moving padding unit to where job is or moving out of the way when not in use. Constructed of 3/4” select white maple with welded steel frame and quality casters. Overall dimensions: 60”H x 28”W x 24”D. Shipping weight: 115 lb. Ships UPS.
Padding Supplies GENERAL GRAPHIC PAD ADHESIVE A pure synthetic resin adhesive for padding all grades and weights of paper, with or without backing. Recommended for use with all General Graphic Padding Presses. Non-hazardous. Available in white or red. Keep from freezing. Code: White: PA-QW PA-GW quart gallon Universal carbonless pad adhesive for NCR, 3M and Mead forms. Separates easily. Recommended for all General Graphic Padding Presses.
3 Spindle Paper Drills FP-IV Auto 3 Spindle Electric Paper Drill The FP-IV–Auto Paper Drill is a high capacity 3-hole drill with a paper capacity of 4” or approximately 1,000 sheets of 20 lb bond. The center head is fixed and the outer two heads are adjustable from 2 1/4” to 4 3/4”. The table has self centering guides for placement of paper. Paper size ranges from 3 1/2” to 17” wide. Back margin is adjustable up to a 3 1/2” depth. Table size is 18 1/4” x 14 3/8”.
Single Spindle Paper Drills FP100LS-AUTO The Model FP100LS-AUTO is a unique single spindle paper drill. This is a preprogrammed paper drill that includes the most common drilling patterns. Simply set the program to 1, 2, 3, or 4 hole drilling. Push the start buttons and the drill automatically drills and moves the paper to complete the drilling cycle. Once cycle is completed, drill will automatically shut off. Drill capacity is 4” or approximately 1000 sheets of 20 pound bond.
General Graphic Drill Bits General Graphic carries a full range of drill bits for most paper drills manufactured today. General Graphic Drill Bits are made of tempered steel to maintain sharpness and prevent clogging. GENERAL GRAPHIC/CHALLENGE STYLE “A” Fits all Style “A” drills including Challenge, General Graphic FP60LS, Mark-3 and Skylab models, Graphic Products, Ottawa, Superspeed, and some Rosback drills. Sizes from 1/8" to 1/2" diameter in increments of 1/32".
Drill Bits/Sharpeners LAWSON LASSCO-SPINNET Style “B” Lawson Drill Bits with 2” capacity. Code: DB-B1-4 DB-B5-16 1/4” 5/16 Style “L” for Lassco-Spinnet drills with 1” capacity. Code: DB-L1-4 DB-L5-16 DB-L3-8 BAUM/NYGREN DAHLY 1/4” 5/16” 3/8” Before ordering be sure to note your model. Many Lassco Drills use the 2” capacity bit (same as Style “A”). Style “C” for Baum/Nygren Dahly with 2” capacity.
Drill Blocks/Accessories DRILL BLOCKS Code: Size: Drill Mfg/Mdl: DBL-1 1 1/2" diameter x 3/4” thick Challenge JO/JF DBL-2.
Finishing Equipment and Wire BINDERYMATE TABLE TOP STITCHER BOOKLETMAC BOOKLET MAKER The BookletMac is a semiautomatic booklet maker for producing professional booklets quickly and easily. The BookletMac staples and folds in a single operation. Capacity is 20 sheets of 20 lb bond for books up to 80 pages. Can make booklets from letter, legal and 11” x 17” paper. Can do up to 800 booklets per hour. Code: BOOKMAC The BinderyMate is designed for use in flat or saddle applications.
Rapid Staplers, Accessories and Supplies RAPID 106 STAPLER The Rapid 106 Stapler is the standard stapler for all print and copy shops. The flexible design allows for either flat stapling or saddle stapling for booklets. The 106 stapler can staple sets from 2 sheets to 20 sheets (saddle), or 40 sheets (flat) of standard bond paper. Stapler can be triggered either by convenient foot pedal or depth adjustable triggers. Side guides allow for precise staple location. Shipping weight 17 lb.
Staplers and Staples LONG REACH STAPLERS RAPID 49 STAPLER Staples up to 170 sheets of paper. Steel frame construction. Uses staple sizes from 5/16” to 3/4”. Adjustable throat depth to 2 3/4”. Economically priced. Code: 49 Long reach steel frame hand stapler with locking adjustable throat. Available in either 12” or 16” throat. Convenient holes drilled in frame for attachment to a counter for self-service use. Uses code 210-1-4 1/4” and 210-5-16 5/16” staples.
Shrink Wrap SHRINK AND SEAL SYSTEMS The Model PP48ST is a unique “All-In-One” L-Sealer and Shrink Tunnel. The unit features a 12 1/2” X 18 1/2” seal area. New “Band Seal Technology” will seal and shrink PVC or Polyolefin Shrink Films with no smoke or residue. Includes Magnetic Hold Down. Heavy duty Plexiglass hood fully encloses sealing and shrinking operation for maximum operator safety. Power requirement is 110 volt, 20 amps. Shipping weight is 275 lbs. Dimensions are 49” L x 26” W x 45” H.
Packaging RAPID 23 STAPLER RAPID 31 STAPLER The Rapid 23 is an extremely durable tacker for fine wire staples. Suitable for securing thin materials, such as fabrics, paper and labels, and other tasks that need only short staples. Ideal for use with wide format material. The Rapid 31 has interchangeable anvils for sealing padded bags, boxes, sacks and other light packages.
Keencut Trimmers/Cutters SABRE AND JAVELIN GENERAL PURPOSE CUTTER BARS ROTARY CUTTERS CLASSIC The Keencut Classic rotary cutter is available in sizes from 24” to 54” The cutter is designed to cut a wide range of materials such as laminates, mounting board, (not foam board), and paper. Optional accessories include roll dispenser, stand, waste catcher and extended squaring arm. These cutters are ideal for cutting PVC foam board up to .25”, foam centered board up to .5”, vinyl, plastic film, and cardboard.
Rotary Trimmers and Paper Cutters PROFESSIONAL TRIMMERS The Professional Trimmers are low cost rotary trimmers available in sizes from 14" to 51”. They feature a self sharpening blade, see-through paper clamp, and adjustable back stop. The Professional Trimmer’s ground circular blade is enclosed in a plastic housing. Larger sizes have the option of a paper roll holder and stand.
Paper Cutter Accessories MAGNETIC CUTTER PADS GENERAL GRAPHIC BOOK CLAMPS Helps eliminate marking when cutting carbonless and other sensitive papers. Soft magnetic vinyl pads stick to clamp. 3" x 15” Pads. Code: MCP 2/pkg PAPER STOCK ANGLE GUIDE Cut books quickly, safely and professionally with General Graphic Book Clamps. Made of solid cast brass, the Clamps safely hold down the folded or stitched side of booklets, pamphlets or catalogs while being trimmed in the paper cutter.
Paper Cutter Blades and Sticks PAPER CUTTER KNIVES PAPER CUTTER STICKS Soft plastic cutter stick. Triumph sticks have holes drilled in the end. Challenge and MBM/Ideal are soft white plastic; Polar and Imperial are a harder red plastic. One dozen sticks per package. High quality inlaid steel. High speed steel available on some sizes. CHALLENGE Code: CB-S150 CB-20 CB-26 CB-30 Model: Size: Spartan Model S150 Model 20/Titan 200 Titan 265/265H 305 MC/MCP/MPX 18 5/16”x 1 11/16” x .25 6H 23 3/4” x 3” x .
Paper Stock Cart and Utility Trucks PAPER STOCK CART The Paper Stock Cart is the ideal tool to move paper around, from copier to finishing equipment, from cutter to folder. The Paper Stock Cart holds up to 11” X 17” size paper. Center angled shelves assist in jogging paper. Handles allow for easy movement. Holds up to 20” high stacks in each of its four bins. Heavy duty casters have 500 pound capacity. Comes with two locking casters to stabilize fully loaded cart. Attractive office gray finish.
Stock Trucks GENERAL GRAPHIC STOCK TRUCKS DUPLICATOR TRUCK 20 TRAY - 12” X 18” The most practical and functional pressroom drying and storage rack built. It holds twenty delivery dollysize 12” x 18” trays. Place a tray in the Duplicator delivery dolly and run press. When tray is filled it is returned to the rack. Another tray is placed in the delivery dolly and the process is repeated. Overall size 28” wide, 36” deep and 63” high. Shipping weight 130 lb.
Roll Laminators and Supplies RSL TABLE TOP ROLL LAMINATOR There are three models of the RSL table-top laminator. The basic models are available in either 15” or 27” wide formats and laminate up to 5 mil thick. These come with silicone hot rollers, touch inlay speed and temperature controls. Uses 1” core material, 110v power. The RSL-2702 is an all in one digital finisher. The RSL-2702 can do both hot and cold laminating. It is capable of handling multiple core sizes and film up to 10 mil in thickness.
Pouch Laminators and Supplies ULTRA PHOTO 13 The ultimate in pouch laminating. The Ultra Photo 13 is a 6 roller laminator with 4 of the rollers heated. The laminator comes equipped with an electronic thermostat for digital temperature control. It has speed control and reverse action. The Ultra Photo 13 will laminate materials up to 13 1/4” wide at speeds up to 59” per minute. It can accommodate pouches up to 10 mil in thickness. Includes ready light and auto shut off when not in use. All metal construction.
Binding Supplies LAMINATOR CLEANING BAR LAMINATOR CLEANER KIT A light abrasive bar that will not damage rollers. Ideal for removing built up adhesives on laminator rollers. Code: LCB The Standard Laminator Cleaner Kit contains two 4” laminating cleaner bars and a tack cloth. The Deluxe Laminator Cleaner Kit contains 2 laminating cleaner bars, one pint of Laminator Cleaner, one brush and one tack cloth. Everything you need for cleaning your roll laminator.
Punches FP SERIES PAPER HOLE PUNCHES SFP-II 3-HOLE PAPER PUNCH MODEL FP-1XLS punch up to The FP-1(X)LS uses hollow drills to 300 sheets at one time. Table slides to position set by adjustable stops. These stops allow for set-up of two, three or four hole punching. Punch bits are available in sizes 3/16”, 1/4”, 5/16” and 3/8” Handles up to 14” wide paper.
Coil Binding Equipment RBX A200 AUTO PUNCH The RBX-A200 Auto Punch is an innovative punching system that is capable of punching up to 200 sheets of paper at one time. The machine can take a variety of punch dies that are easily changed without the use of tools. The machine is shipped with one die. As with other binders in the RBX series, the A200 uses hollowed punch bits which allow for higher capacity. Once paper is loaded, push the safety buttons. The A200 is preprogrammed to complete the punch pattern.
Comb and Coil Equipment and Supplies SCB HEAVY DUTY PLASTIC COMB BINDER BINDERY WORKSTATION TABLE The SCB Comb Binders are unique in that they use a rectangular hollow punch that allows punching up to 60 sheets of paper at one time for the SCB-60 and 80 sheets at one time for the SCB-80. The difference between the two models is the amount of paper that can be punched and the number of punch pins.
Banding, Perfing and Numbering PRO BANDER BANDING PRESS Fast, efficient, professional way to bundle folded jobs. The Pro Bander’s solid cast iron construction is built tough to last for years. To band, just place pre-cut tie strips or General Graphic Cohesive Bands on bottom plate. Load the Pro Bander with folded sheets. Compress folded sheets. The positive lever-action clamp locks automatically as it compresses. Wrap or tie into a neat, easy to count, easy to handle bundle. Handles folded stacks up to 12”.
Round Corner Machines MODEL 20 CORNER ROUNDER NICE-N-EZ CORNERING MACHINE The Nice-n-EZ is a precise and smooth cornering machine for cutting up to 1” of stock. Ideal for rounding corners on literature, business cards, photographs, negatives and plastic. Handle has a 5” wide grip and is extended in length to provide greater leverage. Large base for better balance. Comes with choice of blade and die. The Model 20 is designed to handle paper and plastic products.
Joggers and Creasing Machine LJ-2 BIN JOGGER HANDY-JOG JOGGERS Perfect for quick printers and mail rooms. Jogs a full ream of standard copy paper or one-half ream of 11” x 17”. Ideal for checks and envelopes. Table size is 4”W x 7”D x 13”H. Shipping weight is 32 lb. The Handy-Jog is a low cost, highly effective jogger that fits into the most cost-conscious budget. With its small footprint, the Handy-Jog can be placed beside any machine.
Static Control ANTI-STATIC TINSEL Anti-Static Tinsel features solid copper bristles and offers a safe, low-cost method of eliminating static electricity. Box contains two 12 yard rolls of tinsel. Code: TINSEL IMPRESS STATIC CONTROL TREATMENT Prevents dirt particles from adhering to treated surfaces. Eliminates friction to reduce static build-up and prevent dirt, dust, lint, and contamination. Code: IM-4 IM-16 Impress 4 oz Impress 16 oz ANTI-STATIC SPRAY Reduces dust attraction.
Wide Format Supplies MODEL 405 GROMMET PRESS The 405 Grommet Press has a heavy duty cast iron frame. Ideal for placing grommets in a variety of material. Comes with a 5/16” die for using #1 grommets. Specifications: Height: 12" Weight: 20 lbs Bench Space: 3 1/2" x 9" Code: GM405 MODEL 479 GROMMET PRESS Model 479 Foot Powered Grommet machine offering increased productivity over the Model 405. Comes standard with a 5/16” die.
Wide Format Supplies SAFETY EDGE CUTTING BAR ALUMINUM T-SQUARES Protects hand while cutting materials as well as helps to insure straight and accurate cuts. Non skid magnetic rubber base prevents slips. Easy to hold rigid lip. Hangs for storage. Graduated edge. Code: SE30 30” Safety Edge SE36 36” Safety Edge SE42 42” Safety Edge Code: SE48 48” Safety Edge SE60 60” Safety Edge SE72 72” Safety Edge SHOP TICKET HOLDERS Heavy-duty vinyl, sealed on three sides, metal eyelet at top for hanging.
Gloves VINYL - DISPOSABLE Chemical resistant, ideal for people who have developed a reaction to latex gloves. Looser fitting than the latex so that hands can breathe. Tear resistant. Available as both powdered and non-powdered. Comes 100 gloves to a dispenser box. Code: Size: GLOVE-VS small GLOVE-VM medium GLOVE-VL large GLOVE-VX extra large Powdered GLOVE-VMP GLOVE-VLP medium large LATEX - DISPOSABLE General Graphic latex gloves are strong medical grade latex. Lightly powdered.
Cleaning and Safety Products TROUNCE NO ROLL EAR PLUGS Lotion Hand Cleaner with Pumice Pleasantly scented with fine ground pumice for deep scrubbing to remove the most difficult soils. This fast-acting formula won't irritate hands or leave a greasy residue. Professional strength. Code: EP-NR EP-NRC Code: 21218 1 gallon FAST ORANGE Lotion Hand Cleaner with Extra Fine Pumice Fast Orange hand cleaner quickly removes ground-in grease and grime without abrading skin like coarser pumice hand cleaners.
Safety Products AIRUG ANTI FATIGUE MATS OILY WASTE CANS Provides safe, temporary disposal of flammable liquid soaked rags or waste materials. Hinged, self-closing, fullwidth cover is snug fitting to guard against spontaneous combustion. Quickly opens to 60 degrees with slight pressure on full-width foot treadle (except 21 gallon). Red enamel finish. Code: 1401 1402 1403 1404 1456 Capacity: 6 gal 8 gal 10 gal 14 gal 21 gal W x D x Ht (in): 11 1/4” Sq.
FIND THESE QUALITY GENERAL GRAPHIC PRODUCTS Continued from Back Cover Javelin Trimmer Job Ticket Holders Joggers Jogging Aid Keencut Knife, Pad Knife, Ink, Roll w/Sheath Knives, Paper Cutter Knives/Blades, Olfa Knives/Blades, X-ACTO 34 51 48 36 34 23 20 37 2 2 Laminating Supplies Laminator Cleaning Kit Laminator Roll Cutter Laminators Laser Cleaner Laser Deletion Pen Laser Plate Cleaner Lassco-Spinnet Drill Bits Latex Gloves Lectro-Stik Waxer Letter Folder Lil-Bit Linen Tester Litho Tape Litho-Opaquer Lon
FIND THESE QUALITY GENERAL GRAPHIC PRODUCTS Addition Pens Adhesive, Padding Air Duster, Dust Off Air Purifier Alcohol Tester Anti Static Mats Anti-Fatigue/Static Mats Anti-Static Tinsel Apron Art Knife Artist Tape Bancheez Cloth Banding Press Banner Tape Bar Sealer Baum Drill Bits Binder, Plastic Comb Binder, Wire BinderyMate Binding Covers Blades, Olfa, X-Acto, Razor Blanket Cleaner Blanket Fix Blanket Scrubber Blankets, Press Bone Folder Book Clamps Booklet Maker Box Tape Dispenser Brayer Brush, Padding B