user manual

128
Select a pertinent key no.
from the key numbers list.
In the case of selecting “061 DIRECT PLU”
• TYPE (Use the selective entry)
PLU: Assigns the key as a direct PLU key.
DEPT: Assigns the key as a direct department key.
• You can also select a direct PLU key by pressing the corresponding key
when the PLU has been assigned directly on the keyboard instead of
selecting the key from the menu.
• When selecting a department, the screen on which a department code is
to be entered (the message “DEPT. CODE”) will appear.
• LEVEL1 through 3 (Use the numeric entry)
Enter a PLU code for each level. For example, if you want to use this
key as PLU code 1 (level 1) and PLU code 101 (level 2), enter 1 for
“LEVEL1” and 101 for “LEVEL2.”
Key numbers
NOTE
Procedure
▼
▼
▼
Direct Key Programming
Use the following procedure to select direct-key programming:
■ Direct key
You can assign departments and PLUs directly to the keyboard. In the case of PLUs, you may assign up to
3 levels to be accessed directly on the keyboard. For key no. positions, refer to the illustration shown below.
25 34 43 52 61 70 79 88 97 106 115
8 16243342516069788796105114
7 15233241505968778695104113
6 14223140495867768594103112
5 13213039485766758493102111
4 12202938475665748392101110
3 11192837465564738291100109
2 1018273645546372819099108
1 9 17 26 35 44 53 62 71 80 89 98 107
RECEIPT
JOURNAL
124 133 142
123 132 141
122 131 140
121 130 139
120 129 138
119 128 137
118 127 136
117 126 135
116 125 134
Departments and PLUs programmable area
• You can assign departments and PLUs only the “Departments and PLUs
programmable area” shown above.
• You cannot assign a department or a PLU to the position to which a
function key has been assigned.
NOTE