User Manual

– 1 –

Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

This Quick Guide will help you to correctly

install and operate your system.

CD-BA250H

MINI COMPONENT SYSTEM

If you require any advice or assistance re-

garding your Sharp product, please visit

our web-site www.sharp.co.uk/support.

Customers without internet access may

telephone 08705 274277 during office

hours (or (01) 676 0648 if telephoning from

Ireland).

Accessories

123

Battery installation of remote control

Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included.

Remove the

Insert the batteries

Replace the cover.

battery cover.

as shown.

TINSE0373AWZZ A0102.HK

FM aerial × 1

Remote control × 1 AM loop aerial × 1

PAGE 1
This Quick Guide will help you to correctly install and operate your system. CD-BA250H MINI COMPONENT SYSTEM 1 If you require any advice or assistance regarding your Sharp product, please visit our web-site www.sharp.co.uk/support. Customers without internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland).
PAGE 2
3 System connections Right speaker Left speaker FM aerial Red AM loop aerial Black Left speaker Right speaker TV RCA lead (not supplied) Wall socket (AC 230 V, 50 Hz) To the line output sockets VCR, DVD, etc. Web-site: www.sharp.co.
PAGE 3
4 Turn on your system The first time the unit is plugged, the unit will enter the demonstration mode. You will see words scroll. 1 Press the X-BASS/DEMO button to cancel the demonstration mode. 2 Press the ON/ STAND-BY button to turn the power on. Listening to a CD (CDs) 12 cm (5”) 1 Press the CD button. 8 cm (3”) 2 Press the 7 OPEN/CLOSE button to open the disc tray. 3 Place the CD(s) on the disc tray, label side up.
PAGE 4
Listening to a cassette tape (TAPE 1 or TAPE 2) TAPE 1 ■ 1 Open the cassette door by pushing the 7 PUSH EJECT”. area marked “7 2 Load a cassette into the TAPE 1 or TAPE 2 cassette compartment with the side to be played facing toward you. 3 Press the TAPE (1 V 2) button to select the cassette you want to listen to. 4 Press the 0 / R button to start playback.