MPONENT SYSTEM AÎNE STÉRÉO CD-BA3100 Mini Component System consisting of CD-BA3100 (main unit) and CP-BA3100 (speaker system). Mini-chaîne stéréo CD-BA3100 composée de CD-BA3100 (appareil principal) et de CP-BA3100 (enceintes acoustiques). -BA3100 ATION MANUAL E D’EMPLOI ENGLISH FRANÇAIS 1 Downloaded From Disc-Player.com Sharp Manuals 2001.2.1, 2:40 PM Please refer to pages E-1 to E-28. Se reporter aux pages F-1 à F-28.
ENGLISH Contents oduction u for purchasing this SHARP product. To obtain the best perform this product, please read this manual carefully. It will guide you ng your SHARP product. ■ General Information Page Precautions ......................................................................................... 2 Controls and Indicators................................................................. 3 - 6 ■ Preparation for Use System Connections ............................................................
tions hat the equipment is positioned in a well-ventilated area and e is as least 10 cm (4") of free space along the sides, top and 4”) 10 cm (4”) 10 cm (4”) Warning: The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage.
trols and Indicators ■ Front panel 4 5 6 7 8 9 10 11 12 13 14 15 16 17 21 22 23 24 25 NGLISH 01. 02. 03. 04. 05. 06. 07. 08. 09. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. Memory/Set Button .............................................................. 12,16, 18 Equalizer Mode Select Button ........................................................ 11 Volume Control ................................................................................ 11 Extra Bass/Demo Mode Button ..
6 7 8 12 13 14 15 16 01. 02. 03. 04. 05. 06. 07. 08. 09. 10. 11. 12. 13. 14. 15. 16. CD Music Schedule Indicators CD Play Indicator CD Pause Indicator Tape Play Indicator CD Repeat Indicator CD Indicators FM Stereo Mode Indicator FM Stereo Receiving Indicator Memory Indicator CD Random Play Indicator Tape 2 Record Indicator Extra Bass Indicator Timer Recording Indicator Timer Play Indicator Sleep Indicator Spectrum Analyzer/Volume Level Indicator ■ Rear panel 1 2 01. 02. 03. 04.
rols and Indicators (continued) ■ Remote control 1 2 15 16 3 4 17 18 19 20 21 22 5 6 7 8 9 10 11 12 23 24 25 13 14 01. 02. 03. 04. 05. 06. 07. 08. 09. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. Reference page Remote Control Transmitter ................................................................ 9 CD Direct Play Buttons ......................................................... 15, 16, 21 CD Pause Button .....................................................................
system Speaker grilles are removable: Make sure nothing comes into contact with the speaker diaphragms when you remove the speaker grilles. 5 4 Left speaker Right speaker The left and right speakers have individual shapes. For best performance, place the speakers according to the illustration on the right. 6 Bi-amp system: Each speaker unit has a built-in subwoofer (low frequency range) which is driven separately from the woofer and tweeter (mid-to-high frequency range).
tem Connections AM loop aerial FM aerial Right speaker Left speaker VCR, DVD, etc. ,,, ,,,, ,,, NGLISH 2 Downloaded From Disc-Player.com Sharp Manuals 01.2.
ons (continued) ■ FM/AM loop aerial connection connection Connect the FM/AM loop aerial to the ANTENNA socket. er black wire to MAIN(-) terminal and the blue wire to the Left speaker Position the FM aerial wire and rotate the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, or attach it to a stand or a wall. Notes: ● Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.
mote Control ery installation A” size batteries (UM/SUM-3, R6, HP-7 or similar). are not included. ve the battery cover. the batteries according to the direction indicated in the batmpartment. ■ Test of the remote control Face the remote control directly to the remote sensor on the unit. The remote control can be used within the range shown below: Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the music.
al Control ■ Demonstration mode The first time the unit is plugged, the unit will enter the demonstration mode. You will see words scroll. To return to the demonstration mode: When the unit is in the power stand-by mode, press the X-BASS/DEMO button again. Note: When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode. ■ Display brightness (2 levels) You can switch the display brightness by pressing the DIMMER button.
nd Control ■ Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease. Remote control operation: Press the VOLUME „ button to increase the volume and the VOLUME ˛ button for decreasing. 0 1 2 ..... 29 30 MAXIMUM ■ Bass control When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and “X-BASS” will appear.
g the Clock 4 X or W ) button to adjust the hour and Press the TUNING/TIME (X then press the MEMORY/SET button. ● Press the TUNING/TIME (X or W) button once to advance the time by 1 hour. Hold it down to advance continuously. Press the TUNING/TIME (X X or W ) button to adjust the minutes and then press the MEMORY/SET button. ● Press the TUNING/TIME (X or W) button once to advance the time by 1 minute. Hold it down to change the time in 5-minute intervals.
ening to a CD (CDs) m can play audio CD-R and CD-RW discs just as CD discs, but cannot ording. ■ To play discs in turn (from Disc 1 to Disc 6) 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the CD button. Press the s 1 7 button to open the disc tray 1. Place a CD on the disc tray 1, label side up. Be sure to place 8 cm (3") CD in the middle of the disc trays. 12 cm (5”) 5 8 cm (3”) Press the s 1 7 button to close the disc tray 1.
d CD playback (continued) 0/R (0 0R R) button to start playback. ■ To locate the beginning of a track To move to the beginning of the next track: Press the 2 / 4 button for less than 0.5 seconds during playback. ● You can skip to any track by pressing the 2 / 4 button repeatedly until the desired track number appears. To restart the track being played: Press the 3 / 5 button for less than 0.5 seconds during playback. ● You can skip to any track by pressing the back: ton on the remote control.
Specify a Disc to Play Repeat or Random Play y a disc by specifying the disc number. ■ Repeat play e of the s 1 - s 6 buttons to play the desired disc. All tracks on up to 6 discs, or a programmed sequence can be continuously repeated. To repeat all tracks on up to 6 discs: Press the 0/R (0 R) button twice. Selected disc number By pressing the 0/R (0 R) button after one of the s 1 - s 6 buttons is pressed, repeat play will be performed on that disc.
mmed Play 5 6 7 Press the MEMORY/SET (MEMORY) button to save the track number. Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed. Press the ■ (CD ■ ) button. 0R Press the 0/R (0 R) button to start playback. Note: During programme play, buttons s 1 - s 6 will not work. To clear the programmed selections: Press the CLEAR button whilst the “MEMORY” indicator is flashing. Each time the button is pressed, one track will be cleared, beginning with the last track programmed.
ening to the Radio 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). X or W ) button to tune in to the desired Press the TUNING/TIME (X station. Manual tuning: Press the TUNING/TIME button as many times as required to tune in to the desired station. Auto tuning: When the TUNING/TIME button is pressed for more than 0.
ng to the Memorised Station sing a station M and FM stations in memory and recall them at the push of a ng) ■ To recall a memorised station Press the PRESET (X X or W ) button for less than 0.5 seconds to select the desired station. Preset channel steps 1 - 3 in “Listening to the Radio” on page 17. Frequency and frequency band ■ To scan the preset stations The stations saved in memory can be scanned automatically. (Preset memory scan) 1 Press the PRESET (X or W ) button for more than 0.5 seconds.
ening to a Cassette Tape (TAPE 1 or TAPE 2) Playback is possible in TAPE 1 compartment as well as in TAPE 2. ayback: back, use normal or low-noise tapes for the best sound. r CrO 2 tapes are not recommended.) use C-120 tapes or poor-quality tapes, as they may cause ions. oading a tape into the cassette compartment, tighten the slack en or pencil. 1 2 3 Press the ON/STAND-BY button to turn the power on. Open the cassette door by pushing the area marked “7 7 PUSH EJECT”.
ding from the Radio Recording can be operated in the TAPE 2 compartment. The TAPE 1 is for playback only. sound controls can be adjusted with no effect on the recorded Sound Monitor). use only normal tapes. Do not use metal or CrO2 tapes. 1 2 Tune in to the desired station. (See page 17.) Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. 3 I6 Press the REC PAUSE (I6 I6) button.
ording from a CD (CDs) You can record the desired CD using the s 1 - s 6 buttons. 1 2 Press the ON/STAND-BY button to turn the power on. Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. 3 4 Press the CD button and load the desired disc. Press the REC PAUSE I6 (I6 I6) button. Recording will be paused. 5 Press one of the s 1 - s 6 buttons to start recording.
ng from Tape to Tape You can record from TAPE 1 to TAPE 2. For recording, use only normal tapes. Do not use metal or CrO2 tapes. 1 2 Press the ON/STAND-BY button to turn the power on. Load a prerecorded cassette into the TAPE 1 cassette compartment. Insert a blank tape into the TAPE 2 cassette compartment. It is recommended that the recording tape is the same length as the master tape. I6 Press the REC PAUSE (I6 I6) button. Recording will be paused.
er and Sleep Operation yback: ns on and plays the desired source (CD, tuner, tape) at the preset time. ■ Timer playback or Timer recording Before setting timer: ording: ns on and starts recording from the tuner at the preset time. 1. Press the CLOCK button to check that the clock is on time. eration: ompact disc and cassette tape can all be turned off automatically. 2. For timer playback: Load a cassette or discs to be played.
d Sleep Operation (continued) W or X ) button to specify the minutes, UNING/TIME (W the MEMORY/SET button. ■ Sleep operation 1 2 Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until “SLEEP” is displayed. ● 3 hours - 5 minutes → 5-minute intervals ● 5 minutes - 1 minute → 1-minute intervals he timer playback/timer recording: STAND-BY button to turn the power on. reset time is reached, playback or recording will start.
ancing Your System ■ Listening to the playback sounds from VCR, tion cable is not included. commercially available cable as shown below. VCR, DVD, etc. DVD, etc. 1 To the line output socket White White Red Use a connection cable to connect the VCR, DVD, etc. to the VIDEO/ AUX sockets. When using video equipment, connect the audio output to this unit and the video output to a television. 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the VIDEO/AUX button. Play the VCR, DVD, etc.
eshooting Chart Possible cause Symptom ● Is the erase-prevention tab removed? ● Cannot record tracks with proper ● Is it a normal tape? ● (You cannot record on a metal or CrO2 sound quality. ● Cannot erase completely. t on time. ● Did a power failure occur? ● Reset the clock. (Refer to page 12.) ● Sound skipping. s pressed, the unit nd. ● Set this unit to the power stand-by mode ● Cannot hear treble. ● Sound fluctuation. ard. and then turn it back on.
bleshooting Chart (continued) Maintenance ouble occurs ■ Cleaning the tape-handling parts roduct is subjected to strong external interference (mechanical shock, exic electricity, abnormal supply voltage due to lightning, etc.) or if it is operctly, it may malfunction. roblem occurs, do the following: unit to the stand-by mode and turn the power on again. ● Dirty heads, capstans or pinch rollers can cause poor sound and tape jams.
cations y of continuous improvement, SHARP reserves the right to make ation changes for product improvement without prior notice. The cation figures indicated are nominal values of production units. e deviations from these values in individual units. ■ Tuner Frequency range FM: 87.5 - 108 MHz AM: 530 - 1,720 kHz 164 W Width: 260 mm (10-1/4") Height: 338 mm (13-5/16") Depth: 375 mm (14-13/16") 8.6 kg (19.
FRANÇAIS Table des matières oduction s remercions d’avoir porté votre choix sur ce produit SHARP. Pour meilleur parti, veuillez lire ce mode d’emploi très attentivement. marque spéciale ■ Informations générales Page Précautions ......................................................................................... 2 Commandes et voyants ................................................................. 3 - 6 ■ Avant l’utilisation Raccordement du système ...............................................
tions pareil est installé dans un lieu bien aéré et qu’il est dégagé de d’obstacle à moins de 10 cm de l’appareil). 10 cm 10 cm 10 cm eil sur un socle stable, horizontal et tions. Le niveau sonore réel dans un réglage donné dépend de divers éléments: rendement des enceintes, lieu d’écoute, etc. Éviter une augmentation brusque du volume. Elle se produit, par exemple, lors de la mise sous tension avec un réglage du volume élevé. Éviter aussi une longue écoute à niveau élevé.
mmandes et voyants ■ Façade 4 5 6 7 8 9 10 11 12 13 14 15 16 17 21 22 23 24 25 ANÇAIS 26 01. 02. 03. 04. 05. 06. 07. 08. 09. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. Touche de mémoire/réglage ............................................... 12,16, 18 Sélecteur de mode d’égaliseur ..................................................... 11 Touches de volume......................................................................... 11 Touche d’extra-graves/mode de démonstration ...
■ Affichage 7 8 12 13 14 15 16 MODÈLE N° CD-BA3100 MINI-CHAÎNE STÉRÉO 20 V CA 60 Hz 164 W GAMME DE FRÉQUENCES: FM 87,5 - 108 MHz AM 530 - 1720 kHz N° DE SÉRIE HARP CORPORATION 01. 02. 03. 04. 05. 06. 07. 08. 09. 10. 11. 12. 13. 14. 15. 16.
mandes et voyants (suite) ■ Télécommande 1 2 15 16 3 4 17 18 19 20 21 22 5 6 7 8 9 10 11 12 23 24 25 13 14 01. 02. 03. 04. 05. 06. 07. 08. 09. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. Page de référence Émetteur de télécommande ............................................................... 9 Touches de lecture directe CD .............................................. 15, 16, 21 Touche de pause CD ......................................................................
es acoustiques Les façades des enceintes sont amovibles: che Veiller à ce que rien ne se heurte contre le diaphragme lorsqu’on retire la façade. 5 4 Enceinte de gauche Enceinte de droite Les deux enceintes ont des formes différentes. Pour obtenir la meilleure performance, disposer les enceintes comme le montre l’illustration ci-contre.
cordement du système Cadre-antenne AM Antenne FM Enceinte de droite Enceinte de gauche Magnétoscope, DVD, etc. ,,, ,,,, ,,, ANÇAIS 2 Downloaded From Disc-Player.com Sharp Manuals 01.2.
ons (continued) ■ Raccordement de l’antenne FM/AM ement des enceintes les: oir en bas à la borne MAIN(-) et le bleu à la borne MAIN(+). Raccorder l’antenne FM/AM au jack ANTENNA. ofer auxiliaire: oir en haut à la borne SUBWOOFER(-) et le rouge à la FER(+). te Enceinte gauche ● Éloigner l’antenne de l’appareil ou du cordon d’alimentation pour assurer une meilleure réception. ● Ne pas relier l’antenne FM fournie et une antenne FM extérieure. Un problème se produira.
commande e en place des piles piles “AA” (UM/SUM- 3, R6, HP- 7 ou équivalent). pile n’est livrée avec l’appareil. le couvercle. er les piles en respectant les polarités indiquées dans le ent de piles. ■ Essai de la télécommande Diriger la télécommande vers le capteur placé sur l’appareil. La télécommande peut être utilisée dans le rayon illustré ci-dessous: Appuyer sur la touche ON/STAND-BY. Le système s’est allumé ? On peut maintenant écouter de la musique.
ande générale ■ Mode de démonstration Lorsque l’appareil est en attente (mode de démonstration), appuyer sur la touche XBASS/DEMO. Le mode de démonstration est annulé et son affichage disparaît. Pour repasser au mode de démonstration: Lorsque l’appareil est en veille, réappuyer sur la touche X-BASS/DEMO. Note: Dès la mise sous tension, la touche X-BASS/DEMO peut être utilisée pour passer au mode d’extra-graves.
lage du son ■ Commande de volume Appareil principal: Augmenter le volume en tournant la commande VOLUME dans le sens des aiguilles d’une montre. En sens contraire, le volume sera réduit. Télécommande: Appuyer sur la touche VOLUME „ pour augmenter le volume et la touche VOLUME ˛ pour l’effet contraire. 0 1 2 ..... 29 30 MAXIMUM ■ Commande de graves Branché, l’appareil entre automatiquement en mode d’extra-graves, qui suramplifie les basses fréquences, et affiche “X-BASS”.
ge de l’horloge 4 X ou W ) pour régler les Appuyer sur la touche TUNING/TIME (X heures et puis appuyer sur la touche MEMORY/ SET. ● Appuyer une fois sur la touche TUNING/ TIME (X ou W) pour avancer l’heure Appuyer sur la touche TUNING/TIME (X X ou W ) pour régler les minutes et puis appuyer sur la touche MEMORY/ SET. ● Appuyer une fois sur la touche TUNING/ TIME (X ou W) pour avancer l’heure l’horloge est réglée sur l’affichage 12 heures (AM 12: 00). r la touche ON/STAND-BY pour allumer l’appareil.
ute de CD e permet de reproduire des disques CD-R et CD-RW audio ainsi que CD nels et non d’enregistrer dessus. ■ Pour reproduire des disques dans l’ordre (de 1 à 6) 1 2 3 4 Appuyer sur la touche ON/STAND-BY pour allumer le système. Appuyer sur la touche CD. Appuyer sur la touche s 1 7 pour ouvrir le tiroir 1. Placer un CD sur le tiroir 1, face portant l’étiquette vers le haut. Placer le CD de 8 cm au milieu du tiroir. 12 cm 5 8 cm Appuyer sur la touche s 1 7 pour refermer le tiroir 1.
d CD playback (continued) 0R r la touche 0/R (0 R) pour déclencher la lecture. ■ Pour localiser un morceau Pour passer au morceau suivant: Appuyer, en cours de lecture, sur la touche 2 / 4 (moins de 0,5 seconde). ● On peut passer à un morceau souhaité en agissant à plusieurs reprises sur la touche 2 / 4 en observant le numéro de morceau affiché. Pour repasser le morceau en cours: Appuyer, en cours de lecture, sur la touche 3 / 5 (moins de 0,5 seconde).
r spécifier un disque à oduire signer le disque par son numéro. Répétition et lecture au hasard ■ Répétition On peut répéter la totalité des disques (6 maxi) ou une programmation. Répétition de la totalité des disques (6 maxi): r sur l’une des touches s 1 - s 6 pour sélectionner le disque. Appuyer deux fois sur la touche 0/R (0 R) . Numéro du disque choisi Si on appuie sur la touche 0/R (0 R) après avoir pressé l’une des touches (s 1 - s 6), le disque correspondant sera répété.
e des morceaux programmés 5 6 7 Appuyer sur la touche MEMORY/ SET (MEMORY) pour stocker le numéro de morceau. Renouveler les étapes 2 - 4 pour d’autres morceaux. 32 morceaux au total sont programmables. Appuyer sur la touche ■ (CD ■ ). 0R Déclencher la lecture en appuyant sur la touche 0/R (0 R). Note: Pendant la lecture des morceaux programmés, les touches s 1 - s 6 ne fonctionnent pas. Pour effacer des morceaux programmés: Appuyer sur la touche CLEAR avant que “MEMORY” ne cesse de clignoter.
ute de la radio 1 2 3 Appuyer sur la touche ON/STAND-BY pour allumer l’appareil. Appuyer à plusieurs reprises sur la touche TUNER (BAND) pour sélectionner une gamme d’ondes souhaitée (FM ou AM). X ou W) pour faire l’accord Appuyer sur la touche TUNING/ TIME (X sur la station souhaitée. Accord manuel: Appuyer sur la touche TUNING/TIME autant de fois qu’il est nécessaire pour régler le tuner sur la station.
d’une station mise en mémoire mémoire d’une station tocker 40 stations en AM et en FM dans la mémoire et de les mple pression d’une touche. ■ Rappel d’une station mémorisée X ou W ) pour Appuyer moins de 0,5 seconde sur la touche PRESET (X sélectionner une station souhaitée. Canal de présélection tapes 1 - 3 dans “Écoute de la radio”, page 17. Fréquence et gamme d’ondes ■ Pour balayer les stations présélectionnées On peut balayer les stations mises en mémoire automatiquement.
ute de la cassette (TAPE 1 ou TAPE 2) La lecture est possible sur les compartiments TAPE 1 et TAPE 2. ecture: tenir la meilleure qualité sonore, utiliser une cassette e ou à faible bruit. (Les cassettes métal ou CrO2 sont eillées.) utiliser les cassettes C-120 ou les cassettes de mauvaise L’appareil risque de mal fonctionner. mettre une cassette dans le compartiment, tendre la bande que avec un crayon ou un stylo à bille. 1 2 3 Allumer l’appareil en appuyant sur la touche ON/STAND- BY.
strement à partir de la radio L’enregistrement se fait dans le compartiment TAPE 2. Le TAPE 1 est pour la lecture seulement. 1 2 Faire l’accord sur la station voulue (voir page 17). Mettre une cassette dans le compartiment TAPE 2 en tournant vers soi la face sur laquelle on enregistre. Enrouler l’amorce où l’enregistrement ne se fait pas. 3 I6 Appuyer sur la touche REC PAUSE (I6 I6). L’enregistrement est mis en pause.
egistrement à partir de CD On peut enregistrer un CD souhaité au moyen des touches s 1 - s 6. 1 2 Appuyer sur la touche ON/STAND-BY pour allumer l’appareil. Mettre une cassette dans le compartiment TAPE 2 en tournant vers soi la face sur laquelle on enregistre. Enrouler l’amorce où l’enregistrement ne se fait pas. 3 4 Appuyer sur la touche CD et mettre le disque souhaité en place. Appuyer sur la touche I6 REC PAUSE (I6 I6). L’enregistrement est mis en pause.
entre cassettes On peut duplicater des morceaux de TAPE 1 à TAPE 2. Pour enregistrer, utiliser seulement une cassette normale et non métal ou CrO2. Mettre une cassette enregistrée dans le compartiment TAPE 1 et une cassette vierge dans le compartiment TAPE 2. Il est conseillé d’utiliser deux cassettes ayant la même durée d’enregistrement. 3 Agir sur la touche TAPE (1 V 2) pour afficher “TAPE 1”. 4 I6 Appuyer sur la touche REC PAUSE (I6 I6). L’enregistrement est mis en pause.
rations programmées et mise en arrêt différée rogrammée: allume et reproduit une source spécifiée (CD, tuner, cassette) à une heure ■ Lecture ou enregistrement programmés Avant de régler la minuterie: ement programmé: 1. Appuyer sur la touche CLOCK pour vérifier que l’horloge est à l’heure. s’allume et commence l’enregistrement d’une émission radio à l’heure rrêt différée: CD ou la cassette peut être éteint automatiquement. 2.
d Sleep Operation (continued) ■ Mise en arrêt différée 1 2 Reproduire la source souhaitée. Agir à plusieurs reprises sur la touche TIMER/SLEEP pour afficher “SLEEP”. Changement de la durée pour la mise en arrêt différée: Lorsque la durée est affichée, appuyer sur la touche TUNING/TIME (X or W). (Maximum: 3 heures - Minimum: 1 minute) ● 3 heures - 5 minutes → intervalle de 5 minutes ● 5 minutes - 1 minute → intervalle de 1 minute er l’opération programmée: a touche ON/STAND-BY pour allumer l’appareil.
chissement du système ■ Écoute du son en provenance d’un magné- raccordement n’est pas fourni. un câble vendu dans le commerce. Magnétoscope, DVD, etc. toscope, un lecteur DVD, etc. 1 Vers le jack de sortie de ligne Rouge Blanc Blanc Utiliser un cordon de raccordement pour connecter un magnétoscope, un lecteur de DVD, etc. au jack VIDEO/AUX. Lorsqu’il s’agit d’un élément vidéo, relier la sortie audio à ce système et la sortie vidéo à un téléviseur.
nage soudre pas mal de problèmes sans faire appel à un dépanneur. se reporter au tableau ci-dessous avant de prendre contact avec centre de réparation agréés par SHARP. ■ Platine à cassette Cause Problème ● Enregistrement impossible. ● La languette de protection est-elle en- ● La qualité sonore n’est pas assu- ● S’agit-il d’une cassette normale? levée? ● Y a-t-il eu une panne de courant? répond pas à la touche. ● Mettre l’appareil en veille et le rallumer.
nnage (suite) Entretien cas de dérangement ■ Nettoyage des pièces relatives à la bande a subi une force extérieure (chocs, électricité statique, surtension due à etc.) ou une mauvaise manipulation, il peut mal fonctionner. lors comme suit: tra l’appareil en attente et le rallumera ensuite. pareil n’est pas remis en état malgré l’étape 1, débrancher et rebranappareil. Et rallumer ce dernier.
echnique le droit d’apporter des modifications à la présentation et aux des élioration. Les valeurs indiquées dans ce document sont les valeurs reils de série mais de légères différences peuvent être constatées re. ■ Tuner Gamme de fréquences 164 W 8,6 kg Réponse en fréquence 50 - 14.000 Hz (Bande normale) Rapport signal/bruit 55 dB (TAPE 1, lecture) 50 dB (TAPE 2, enregistrement/lecture) ateur tie ■ Platine à cassette Pleurage et scintillement RMS: 200 W (100 W + 100 W) (10 % de D. H. T.
MEMO/MÉMORANDUM 2 Downloaded From Disc-Player.com Sharp Manuals 2001.2.
MEMO/MÉMORANDUM 3 Downloaded From Disc-Player.com Sharp Manuals 2001.2.
POUR CANADA SEULEMENT CANADA ONLY GARANTIE LIMITÉE LIMITED WARRANTY Produits Électronique grand public Consumer Electronics Products Bravo! Vous Venez de faire un excellent achat! Congratulations on your purchase! ectronics of Canada Ltd.