User Manual

E-16
ENGLISH
CD Playback
- Programmed Play -
Programmed Play
Up to 32 tracks can be programmed.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the CLEAR button
on the remote control. The "MEMORY" indicator will disappear and all the pro-
grammed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be dis-
played. Then follow steps 1 - 6 to add tracks. The new tracks will be stored after the
last track of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the / or /
button.
Notes:
z
Opening any tray of the programmed discs automatically cancels the programmed
sequence.
z
Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another, the programmed selections will not be cleared.
z
During programme operation, random play is not possible.
1
Whilst in the stop mode, press
the MEMORY/SET (MEMORY)
button to enter the programming
save mode.
2
Press one of the 1 - 6 buttons
to select the desired disc.
Selected disc number
3
Press the / or / button
to select the desired track.
Selected track
number
Playback
order
4
Press the MEMORY/SET (MEMO-
RY) button to save the track num-
ber.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be pro-
grammed.
6
Press the (CD ) button.
7
Press the / ( ) button to start playback.
Note:
During programme play, buttons 1 - 6 will not work.
To clear the programmed selections:
Press the CLEAR button on the remote control
whilst the "MEMORY" indicator is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.