CD-BK260V/CD-BK2700V CD-BK260V/CD-BK2700V CP-BK260/CP-BK2700 CD-BK260V/CD-BK2700V Video CD Mini System consisting of CD-BK260V/CDBK2700V (main unit) and CP-BK260/CP-BK2700 (speaker system). VIDEO CD MINI SYSTEM MODEL CD-BK260V CD-BK2700V OPERATION MANUAL NTSC/PAL CD-BK260V(FRONT) ENGLISH 1 Downloaded From Disc-Player.com Sharp Manuals 01.7.18, 15:32 Please refer to pages E-1 to E-46.
ENGLISH Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. ! Important Instruction Page Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Special Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories Please confirm that the following accessories are included. 1 "AA" size battery (UM/SUM-3, R6, HP-7 or similar) 2 AM loop aerial 1 FM aerial 1 Video cable 1 Important Instruction Note: Only the above accessories are included. Special Notes CAUTION " This Video CD Mini System is classified as a CLASS 1 LASER product. " The CLASS 1 LASER PRODUCT label is located on the rear cover.
Precautions ! General ! Volume control " Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. The sound level at a given volume setting depends on speaker efficiency, location, and various other factors.
Controls and Indicators ! Front panel Reference page 9 10 1 2 3 4 5 11 12 13 14 15 18 19 20 21 22 29 16 17 23 24 25 26 27 28 30 31 32 33 34 1. Video CD/CD/MP3 Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 27 2. Timer Set Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4. Tape 2 Cassette Compartment . . . . . . . . . . . . . . . . . . . . .
Controls and Indicators (continued) ! Display 1 2 - Controls and Indicators - General Information 3 456 7 17 10 8 11 9 12 13 14 15 16 17 17 1 2 3 4 5 6 7 9 1. Extra Bass Indicator 2. FM Stereo Mode Indicator 3. FM Stereo Receiving Indicator 4. Karaoke Mode Indicator 5. Video CD/CD/MP3 Disc Repeat Play Indicator 6. Video CD/CD/MP3 Disc Pause Indicator 7. Video CD/CD/MP3 Disc Play Indicator 8. Tape 2 Record Indicator 9. Tape Reverse Mode Indicator 10.Video CD/CD/MP3 Disc Number Indicators 11.
! Remote control 2 16 3 4 17 18 5 6 7 8 9 10 11 12 13 14 15 19 20 21 22 23 24 25 26 27 28 29 30 Buttons with " " mark in the illustration can be operated on the remote control only. Other buttons can be operated both on the main unit and the remote control. Battery installation for remote control (See page 11.) 01/4/26 Downloaded From Disc-Player.com Sharp Manuals - Controls and Indicators - 1 General Information Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . .
System Connections - System Connections - Preparation for Use AM loop aerial Right speaker FM aerial Left speaker TV Wall socket (See page 10.) E-7 ENGLISH 01/4/26 Downloaded From Disc-Player.com Sharp Manuals CD-BK260V(S)E1.
! Aerial connection ! Speaker connection Supplied FM aerial: Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be received. Right speaker Left speaker Note: Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.
System Connections (continued) ! Placing the speaker system ! TV/monitor connection There is no distinction between the right and the left speakers. If the TV/monitor has a video input, connect it to VIDEO OUT socket on the rear of the unit. Left speaker Right speaker To video input socket - System Connections - Preparation for Use TV Notes: " The speakers are magnetically shielded. Therefore, they do not affect the display even you use them near the TV.
! Setting the AC voltage selector ! Setting the FM/AM span selector Check the setting of the AC voltage selector located on the rear panel before plugging the unit into a wall socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area. Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC).
Remote Control ! Battery installation ! Test of the remote control 1 Remove the battery cover. 2 Insert the batteries according to the direction indicated in the battery compartment. Face the remote control directly to the remote sensor on the unit. When inserting or removing the batteries, push them towards the nals. battery termi- The remote control can be used within the range shown below: Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy the music. 3 Replace the cover.
General Control ! Demonstration mode The first time the unit is plugged, the unit will enter the demonstration mode. You will see words scroll. To cancel the demonstration mode: When the unit is in the power stand-by mode, press the X-BASS/DEMO button again. Note: When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode. ! To turn the power on Press the ON/STAND-BY button to turn the power on. To set the unit to stand-by mode: Press the ON/STAND-BY button again.
Sound Control ! Volume control Press the VOLUME decreasing. button to increase the volume and the VOLUME 1 2 ..... 29 30 MAXIMUM ! Bass control When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra bass mode, press the X-BASS/DEMO (X-BASS) button.
Setting the Clock 4 Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. Press the TUNING/TIME ( or ) button to adjust the minutes and then press the MEMORY/SET button. In this example, the clock is set for the 24-hour (0:00) display. 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING/TIME ( or ) button to select 24-hour or 12hour display and then press the MEMORY/SET button.
Video CD Any CD that contains motion pictures can be played. You can enjoy motion pictures with the sound quality of MDs and the picture quality of VHS tapes. Digital compression technology allows the continuous playback of up to 74 minutes from a 12 cm disc. With video CDs, you can select the items you want to watch from the on-screen menu. Discs which support "Playback control" can display still pictures. (See pages 17 - 18.) The disc symbols are found on the disc labels or jackets.
Preparation for Video CD Playback ! Adjusting the TV and VCR ! Selecting the video output format The TV and VCR input varies according to connection method. Be sure to make the settings correctly. (Then, follow the playback procedure on pages 17 - 18 to check the settings.) Video CD is recorded in PAL or NTSC format. Select the video output format (NTSC or PAL) according to your TV or VCR. To select the video output format: Whilst in the stop mode, press the PAL/NTSC button.
Playback of a Video CD (CDs) with P. B. C. (Version 2.0) Playback control: Video CD Playback - Playback of a Video CD (CDs) with P. B. C. (Version 2.0) - Video CDs that support "Playback control" can display still pictures. This function can be used with video CD software (video CDs with playback control) that have a playback method recorded on them. You can select items you want to watch from the menu displayed on the TV screen, or you can show still pictures.
Select the desired menu number using the direct search buttons on the remote control. " Playback will begin. " After playback has finished, the menu will reappear. Select the menu number you want to play. ! To move the menu screen (menu screen with more than 1 page) To move to the next menu screen: Whilst in the stop mode, press the PRESET button. To interrupt playback: /SELECT/RESUME button.
Playback of a Video CD (CDs) without P. B. C. (Version 1.1) Video CD Playback - Playback of a Video CD (CDs) without P. B. C. (Version 1.1) - 4 5 E-19 Press the OPEN/CLOSE button to open the disc tray. Place the video CD(s) on the disc tray, label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the video CD in the open position. " Video CDs can be placed in any open position in the disc tray.
! Scan play To interrupt playback: Press the button on the remote control. To resume playback from the same point, press the /SELECT/RESUME button. To stop playback: Press and hold down the PRESET button during playback. ( /RETURN) button. To remove the video CDs: For fast reverse: Press and hold down the PRESET button during playback. After use: Press the ON/STAND-BY button to enter the power stand-by mode.
Direct Search System Repeat or Random Play 1 - Direct Search System / Repeat or Random Play - Advanced Video CD (Version 1.1) Playback By using the direct search buttons, the desired tracks can be played. E-21 2 Whilst in the stop mode, press the DISC SKIP button to select the desired disc. Selected disc number " Repeat Play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
3 Press the direct search buttons on the remote control to select the desired track. You can also select a track by pressing the PRESET (NEXT ) button. 4 Selected track number PRESET ( PREV.) or Press the MEMORY/SET (MEMORY) button to save the track number. Playback order When the track is memorised, "MEMORY" will appear. 5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button.
Digest Selection of Discs and Tracks You can play back a desired track by selecting one from the 9 displayed tracks on the screen. 1 Whilst in the stop mode, press the DIGEST (DI- GEST/TIME SEARCH) button. ! Up to 9 tracks will be displayed on the screen. ! Each time a track is displayed, you can hear the first several seconds of the track. - Digest Selection of Discs and Tracks - Advanced Video CD (Version 1.
Time Search Selection 1 1 Whilst in the playback mode, hold down the DIGEST (DIGEST/TIME SEARCH) button to enter the time search mode. During playback, press the DIGEST (DIGEST/ TIME SEARCH) button. ! The track being played back will be divided into 9 sections and playback will be paused. ! Each time a divided section is displayed, you can hear the first several seconds of the section.
This function marks the desired scene on the video CD to play it back easily. (Up to 9 scenes per disc can be marked.) " To recall a bookmarked scene 1 Whilst in the stop or playback mode, hold down the BOOKMARK button on the remote control for more than 1 second. "BOOKMARK DIGEST" will appear before the marked scenes and numbers are displayed on the TV screen. Each time a bookmarked scene is displayed, you can hear the first several seconds of the scene.
During the stop mode, hold down the ton for more than 1 second. ( /SELECT/RESUME) but- You can check the operation of the main unit by the on-screen display. Playback will begin at the point where playback has stopped. Notes: ! Resume play cannot be activated when the function is changed from CD/VIDEO CD (CD) to another or the unit is set to the power stand-by mode. ! Resume play cannot be performed in the P.B.C. mode.
Listening to a CD (CDs) 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the CD/VIDEO CD (CD) button. Press the OPEN/CLOSE button to open the disc tray. Place the CD(s) on the disc tray, label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position. ! CDs can be placed on any open position on the disc tray. ! Be sure to place 8 cm (3") CD(s) in the middle of the disc positions.
" To locate the beginning of a track Press the button on the remote control. To resume playback from the same point, press the /SELECT/RESUME button. To stop playback: Press the To move to the beginning of the next track: Press the PRESET button for less than 0.5 seconds during playback. ! You can skip to any track by pressing the PRESET button repeatedly until the desired track number appears. ( /RETURN) button. To remove the CDs: Whilst in the stop mode, press the OPEN/CLOSE button.
Listening to MP3 Disc " MP3 2 Press the MP3 DISPLAY button to display the folder name. 3 Select the desired folder by pressing the ton. 4 Press the MP3 DISPLAY button to display the track name. 5 Select the desired track by pressing the ton. - Listening to MP3 Disc - Playback of MP3 Encoded CD MP3 is a form of compression. It is an acronym which stands for Mpeg 1 Audio Layer 3.
Repeat or Random Play " Repeat Play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. To repeat all tracks on up to 3 discs: Press the [When in the stop mode] ( /SELECT/RESUME) button twice. To repeat a desired track: Perform steps 1 - 5 in the "Programmed Play" section (page 31) and then press the ( /SELECT/RESUME) button twice. To cancel repeat play: Total number of tracks Folder name Press the ( " " will go out. /SELECT/RESUME) button again.
Programmed Play 3 Press the direct search buttons on the remote control to select the desired track. You can also select a track by pressing the PRESET (NEXT ) button. 4 Selected track number PRESET ( PREV.) or Press the MEMORY/SET (MEMORY) button to save the track number. Playback order - Programmed Play - Playback of MP3 Encoded CD You can choose up to 32 selections for playback in the order you like. When the track is memorised, "MEMORY" will appear. 5 Repeat steps 2 - 4 for other tracks.
Listening to the Radio 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING/TIME ( station. Manual tuning: Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). or ) button to tune in to the desired Press the TUNING/TIME button as many times as required to tune in to the desired station. Notes: ! When radio interference occurs, auto scan tuning may stop automatically at that point. ! Auto scan tuning will skip weak signal stations.
Listening to the Memorised Station " Memorising a station " To recall a memorised station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 2 Press the PRESET or PRESET 0.5 seconds to select the desired station. Perform the steps 1 - 3 in "Listening to the Radio" on page 32. Press the MEMORY/SET button to enter the preset tuning saving mode.
Listening to a Cassette Tape (TAPE 1) 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Load a cassette into the TAPE 1 cassette compartment with the side to be played facing toward you. 5 Press the 2) button to select TAPE 1. Open the cassette door by pushing the area marked " EJECT". ( /SELECT/RESUME) button to start playback. To stop playback: Press the ( /RETURN) button. Note: You cannot fast-forward or rewind the cassette in the TAPE 1 compartment. Sound Control (See page 13.
Tape Playback - Listening to a Cassette Tape (TAPE 2) - Listening to a Cassette Tape (TAPE 2) 3 Open the cassette door by pushing the area marked " PUSH EJECT". 4 Load a cassette into the TAPE 2 cassette compartment with side A facing you. 5 Press the button to choose one side or both sides. ... To listen to both sides. ... For endless repeat play of both sides. ... To listen to one side. 6 Press the ( /SELECT/RESUME) button to listen to side A, or the button for side B.
Playing Karaoke You can enjoy karaoke to video CDs, CDs, MP3 Discs, radio, cassettes, and other external devices by connecting a separately available microphone to this unit. 1 Set the MIC LEVEL control to MIN to protect the speakers from shock noise and to avoid disturbing noises. 2 Connect the microphone to the MIC socket. ! Use a microphone with a 6.3 mm (1/4") plug, an impedance of 600 ohms. ! Use a standard plug adaptor when using a microphone with a 3.5 mm (1/8") diameter plug.
Playing Karaoke (continued) Notes: ! The initial audio mode setting is "STEREO". ! In any mode other than the STEREO mode, " " will appear. ! The setting will remain unchanged when you change the disc, you set the unit to the stand-by mode or the function is changed from the CD/VIDEO CD (CD) to another function. ! When playing a sound multiplexed disc on which a vocal and music have been separately recorded, select the audio mode as desired.
Recording from the Radio Before recording: ! When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. ! SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. ! The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). ! For recording, use only normal tapes. Do not use metal or CrO tapes. 1 2 Tune in to the desired station. (See page 32.
Recording from a CD (CDs) You can record 3 CDs continuously. 1 2 Press the ON/STAND-BY button to turn the power on. Load a cassette into the TAPE 2 cassette compartment with side A facing you. Wind past the leader of the tape, on which recording cannot be performed. 3 4 Press the CD/VIDEO CD (CD) button and load the desired disc. Press the button to choose one side or both sides. Tape Recording - Recording from a CD (CDs) - ... To record on both sides. ... To record on only one side.
Dubbing from Tape to Tape You can record from TAPE 1 to TAPE 2. 1 2 Press the ON/STAND-BY button to turn the power on. Load a prerecorded cassette into the TAPE 1 cassette compartment. Insert a blank tape into the TAPE 2 cassette compartment. It is recommended that the recording tape is the same length as the master tape. 3 Press the TAPE (1 2) button until "TAPE 1" appears on the display. The reverse mode will be set to " ". [ (TAPE)] Recording will be paused.
Timer and Sleep Operation Timer playback: The unit turns on and plays the desired source (video CD, CD, MP3 disc, tuner, tape) at the preset time. Timer recording: The unit turns on and starts recording from the tuner at the preset time. - Timer and Sleep Operation - Advanced Features Sleep operation: The radio, video CD, CD, MP3 disc and cassette tape can all be turned off automatically.
! Sleep operation 1 2 Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed. The unit will enter the timer stand-by mode automatically. To change the sleep time: Whilst the sleep time is displayed, press the TUNING/TIME ( or ) button. (Maximum: 3 hours - Minimum: 1 minute) To cancel the timer playback/timer recording: " 3 hours - 5 minutes 5-minute intervals " 5 minutes - 1 minute 1-minute intervals Press the ON/STAND-BY button to turn the power on.
Enhancing Your System The connection lead is not included. Purchase a commercially available lead as shown below. VCR, DVD, etc. ! Listening to the playback sounds from VCR, DVD, etc. 1 Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/ AUX sockets. When using video equipment, connect the audio output to this unit and the video output to a television.
Troubleshooting Chart Possible cause " Did a power failure occur? Reset the clock. (Refer to page 14.) " When a button is pressed, the unit " Set this unit to the power stand-by mode does not respond. and then turn it back on. " If the unit still malfunctions, reset it. (Refer to page 45.) " No sound is heard.
Troubleshooting Chart (continued) Maintenance ! If trouble occurs ! Cleaning the tape-handling parts When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. References - Troubleshooting Chart / Maintenance - If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again.
Specifications ! General Power source Power consumption AC 110/127/220/230 - 240 V, 50/60 Hz 130 W Dimensions Width: 270 mm (10-11/16") Height: 330 mm (13") Depth: 340 mm (13-3/8") Weight 7.2 kg (15.7 lbs.) Frequency range ! Cassette deck Frequency response Signal/noise ratio 50 - 14,000 Hz (Normal tape) 55 dB (TAPE 1, playback) 50 dB (TAPE 2, recording/playback) Wow and flutter 0.3 % (WRMS) Type Input terminals RMS: 104 W (52 W + 52 W) (0.9 % T.H.D.
/MEMO 01/4/11 Downloaded From Disc-Player.com Sharp Manuals CD-BK260V(S)_MEMO.
/MEMO 01/4/11 Downloaded From Disc-Player.com Sharp Manuals CD-BK260V(S)_MEMO.
9906 TINST0111AWZZ 1C0110.HK 01/10/12 Downloaded From Disc-Player.com Sharp Manuals CD-BK260V(S)_BACK.