Service manual

196 Troubleshooting ENWW
59.X
PRINTER ERROR
alternates with
To continue
turn off then on
A temporary motor error occurred.
X can equal one of the following:
0 = Motor error
1 = Motor startup error
2 = Motor rotation error
3 = Fuser motor startup error
4 = Fuser motor rotation error
5 = Print cartridge motor startup
error
6 = Print cartridge motor rotation
error
7 = Image drum motor startup error
8 = Image drum motor rotation error
9 = ETB/ITB motor startup error
A = ETB/ITB motor rotation error
B = Alienation motor startup error
C = Alienation motor rotation error
D = Registration motor starting error
E = Registration motor rotation error
Turn the printer power off, and then
turn the printer power on.
62 NO SYSTEM This message indicates that no
system was found. The printer
software system is corrupt.
Turn the printer power off, and then
turn the printer power on.
64 PRINTER ERROR
alternates with
To continue
turn off then on
A temporary printing error occurred
in the scan buffer.
Turn the printer power off, and then
turn the printer power on.
68.X STORAGE ERROR
SETTINGS CHANGED
alternates with
To continue press
One or more printer settings saved
to storage device X is invalid and
has been reset to its factory default.
X can equal one of the following:
0 = onboard NVRAM
1 = removable disk (flash or hard)
Press (S
ELECT button) to clear
the error and continue printing.
Printing can continue, but the user
may experience unexpected
behavior because an error occurred
in permanent storage.
68.X PERMANENT
STORAGE FULL
alternates with
To continue press
Storage device X is full.
X can equal one of the following:
0 = onboard NVRAM
1 = removable disk (flash or hard)
Press (S
ELECT button) to clear
the error and continue printing.
Printing can continue, but the user
may experience unexpected
behavior because an error occurred
in permanent storage.
68.X PERMANENT
STORAGE WRITE FAIL
alternates with
To continue press
Storage device X is failing to write.
X can equal one of the following:
0 = onboard NVRAM
1 = removable disk (flash or hard)
Press (S
ELECT button) to clear
the error and continue printing.
Printing can continue, but the user
may experience unexpected
behavior because an error occurred
in permanent storage.
69.X
PRINTER ERROR
alternates with
To continue
turn off then on
A duplexing error has occured. X
represents the type of duplexing
error and can equal one of the
following:
0 = Duplex mechanism failure
1 = Duplex slide adjust failure
Turn the printer power off, and then
turn the printer power on.
Message Description Recommended action