Service manual

30 Installation ENWW
Site requirements
Operating environment
The electrical and environmental specifications must be maintained to ensure the correct
operation of this printer. Consider the following points before installing the printer:
● Install in a well-ventilated, dust-free area.
● Install on a level, flat, and continuous surface that can support the printer’s weight. Make
sure all four printer feet are level. Do not install on carpet or other soft surfaces.
● Ensure adequate power supply circuitry (see “Electrical specifications” on page 20).
● Install where there is stable temperature and humidity, with no abrupt changes (away from
water sources, humidifiers, air conditioners, refrigerators, or other major appliances). See
“Operating environment” on page 21.
● Install away from direct sunlight, areas with vibration, open flames, ultrasonic heaters,
ammonia fumes, or magnets and devices that emit a magnetic field. If the printer is placed
near a window, make sure the window has a curtain or blind to block any direct sunlight.
● Maintain enough space around the printer for proper access and ventilation. See “Printer
space requirements” on page 31.