Service manual

ENWW Chapter 3 Operation 59
Configure device menu
This menu contains administrative functions.
Printing submenu
Some items on this menu are available in the program or printer driver (if the appropriate driver is
installed). Program and printer-driver settings override control-panel settings. In general, it is
better to change these settings in the printer driver, if applicable.
The following table lists the settings and possible values. In the Values column, the default value
for each setting is the one with an asterisk (*) next to it.
Table 12. Configure device menu—printing submenu
Item Values Explanation
COPIES *1 to 999 Sets the default number of copies by selecting any number
from 1 to 999. Use (UP arrow) or (DOWN arrow) to
select the number of copies. This setting applies only to
print jobs that do not have the number of copies specified
in the program or printer driver, such as a UNIX
®
or Linux
application.
NOTE: It is best to set the number of copies in the
program or printer driver. (Program and printer-driver
settings override control-panel settings.)
DEFAULT PAPER
SIZE
*LETTER
LEGAL
EXECUTIVE
8.5 x 13
A4
A5
B5 (ISO)
B5 (JIS)
EXECUTIVE (JIS)
DPOSTCARD (JIS)
16K
ENVELOPE #10
ENVELOPE MONARCH
ENVELOPE C5
ENVELOPE DL
ENVELOPE B5
CUSTOM
Sets the default image size for paper and envelopes. (The
item name changes from paper to envelope as you scroll
through the available sizes.) This setting applies only to
print jobs that do not have the paper size specified in the
program or printer driver.
DEFAULT CUSTOM
PAPER SIZE
UNIT OF MEASURE
X DIMENSION
Y DIMENSION
Sets a default custom paper size for tray 1. This menu
appears only if the Custom-Standard switch in the
selected tray is set to Custom.
DUPLEX *OFF
ON
Appears only for printers that include a built-in duplexer
(HP LaserJet 2300d printer, HP LaserJet 2300dn printer,
and HP LaserJet 2300dtn printer). Set the value to ON to
print on both sides (duplex) or OFF to print on one side of a
sheet of paper.
DUPLEX BINDING *LONG EDGE
SHORT EDGE
Changes the binding edge for duplex printing. The menu
item appears only if the printer includes a built-in duplexer
(HP LaserJet 2300d printer, HP LaserJet 2300dn printer,
and HP LaserJet 2300dtn printer) and DUPLEX=ON.
OVERRIDE A4/
LETTER
*NO
YES
Directs the printer to print an A4-size job on letter-size
paper if A4-size paper is not loaded in the printer (or vice
versa).