Service manual

60 Operation ENWW
MANUAL FEED *OFF
ON
Feeds the paper manually from tray 1, rather than
automatically from a tray. If MANUAL FEED=ON and tray 1 is
empty, the printer goes offline when it receives a print job.
MANUALLY FEED [PAPER SIZE] appears on the control-
panel display.
COURIER FONT *REGULAR
DARK
Selects the version of Courier font to use:
● REGULAR: The internal Courier font available on the
HP LaserJet 4 series printers.
● DARK: The internal Courier font available on the
HP LaserJet III series printers.
WIDE A4 *NO
YES
Changes the number of characters that can be printed on
a single line of A4-size paper.
● NO: Up to 78 10-pitch characters can be printed on one
line.
● YES: Up to 80 10-pitch characters can be printed on
one line.
PRINT PS ERRORS *OFF
ON
Determines whether a PS error page prints or not.
OFF: PS error page never prints.
ON: PS error page prints when PS errors occur.
PCL There is no value to
select.
Is used to configure the printer’s PCL settings.
FORM LENGTH 5 to 128 (*60) Sets vertical spacing from 5 to 128 lines for default paper
size.
ORIENTATION *PORTRAIT
LANDSCAPE
Is used to select default page orientation.
NOTE: It is best to set the page orientation in the program
or printer driver. (Program and printer-driver settings
override control-panel settings.)
FONT SOURCE *INTERNAL
SOFT
SLOT 1, 2, or 3
● INTERNAL: Internal fonts.
● SOFT: Permanent soft fonts. This option is available
only if it is installed.
● SLOT 1, 2, or 3: Fonts stored in one of the three DIMM
slots. This option is available only if it is installed.
FONT NUMBER *0 to 999 (*0) The printer assigns a number to each font and lists the
numbers on the PCL Font List. The font number appears
in the Font # column of the printout.
FONT PITCH 0.44 to 99.99
(*10.00)
Selects the font pitch. This item might not appear,
depending on the font selected.
FONT POINT
SIZE
4.00 to 999.75
(*12.00)
Selects the font point size. This appears only if a font with
a scalable point size is selected as the default font.
SYMBOL SET *PC-8
Several
Selects any one of several available symbol sets at the
control panel. A symbol set is a unique grouping of all the
characters in a font. PC-8 or PC-850 is recommended for
line-draw characters.
APPEND CR TO
LF
*NO
YES
Select YES to append a carriage return to each line feed
encountered in backward-compatible PCL jobs (pure text,
no job control). Some environments, such as UNIX,
indicate a new line using only the line-feed control code.
Use this option to append the required carriage return to
each line feed.
Table 12. Configure device menu—printing submenu
Item Values Explanation