Service manual
27
• Analog Voltage Range (VDD – VEE) = 3.0 to 18 V Note: VEE must be _ VSS
• Linearized Transfer Characteristics
• Low–noise – 12 nV//Cycle, f . 1.0 kHz Typical
This device contains protection circuitry to guard against damage due to high static voltages or electric
fields. However, precautions must be taken to avoid applications of any voltage higher than maximum
rated voltages to this high–impedance circuit. For proper operation, Vin and Vout should be constrained
to the range VSS _ (Vin or Vout) _ VDD. Unused inputs must always be tied to an appropriate logic
voltage level (e.g., either VSS, VEE or VDD). Unused outputs must be left open.
7.4)AN5277(Dual Channel SEPP Power Amplifier)
The AN5277 is a monolithic integrated circuit designed for 10.0 W (26 V, 8 W)output audio power
amplifier. It is a dual channel SEPP IC suitable for stereo operation in TV application.
Features
• Few external components :
• No Boucherot cells(output C, R)
• No Bootstrap Capacitors
• No Negative Feedback Capacitors
• Built-in muting circuit
• Built-in standby circuit
• Built-in various protection circuits (Load-short, thermal, over-voltage and current)
• High ripple rejection(55 dB)
• Compatible with AN5275, AN5276
• Operating voltage range 10 ~ 32 V(26 V typ.)
7.5)ICE1QS01(Controller for Switch Mode Power Supplies Supporting Low Power
Standby and Power Factor Correction (PFC))
Features
• Line Current Consumption with PFC
• Standby Input Power < 1 W
• Stable Standby Frequency