Service manual

CD-M8000W/CP-M8000
– 6 –
1 Top Cabinet 1. Screw ....................... (A1) x4 6-1
2 Side Panel 1. Screw ....................... (B1) x8 6-1
(Left/Right)
3 CD Player Unit/ 1. Turn on the power supply, ... 6-2
CD Tray Cover open the loading tray, take out
the CD tray cover, and close.
(Note 1)
2. Screw ....................... (C1) x1
3. Hook ......................... (C2) x3
4. Hook ......................... (C3) x2
5. Socket ...................... (C4) x2
4 Rear Panel with 1. Screw ....................... (D1) x9 6-2
Fan Motor 2. Socket ...................... (D2) x1
5 Main PWB 1. Screw ....................... (E1) x2 6-2
2. Flat Cable ................ (E2) x1 7-1
3. Socket ...................... (E3) x4
6 Amp. PWB 1. Screw ....................... (F1) x6 7-2
2. Socket ...................... (F2) x4
3. PWB Holder ............. (F3) x5
4. Flat Wire................... (F4) x1
7 Front Panel 1. Screw .......................(G1) x3 7-2
2. Hook .........................(G2) x2 7-1
8 Mic PWB 1. Screw ....................... (H1) x2 7-3
2.Tip ............................. (H2) x1
9 Display PWB 1. Knob .......................... (J1) x1 7-3
2. Screw ...................... (J2) x15
3. Flat Cable ................. (J3) x1
10 Tape Mechanism 1. Open the cassette holder. 7-3
2. Screw ....................... (K1) x5
11 Headphones PWB 1. Screw ....................... (L1) x1 7-3
12 Turntable 1. Hook ........................ (M1) x2 7-4
2. Cover ...................... (M2) x1
13 Loading Tray 1. Turn fully the lock lever in the . 6-3
arrow direction . ......................
2. Push the loading tray backward to 7-5
engage the claw with the groove
and remove it in the direction
of the arrow. ................. (N1) x6
14 CD Servo PWB 1. Screw ....................... (P1) x2 7-6
(Note 2) 2. Hook ......................... (P2) x1
3. Socket ...................... (P3) x4
15 CD Mechanism 1. Hook .........................(Q1) x2 8-1
2. Hook .........................(Q2) x2
DISASSEMBLY
Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take cassette tape and compact disc out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to
be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
4. Take sufficient care on static electricity of integrated
circuits and other circuits when servicing.
Figure 6-2
Figure 6-3
CD-M8000W
STEP
REMOVAL PROCEDURE FIGURE
Figure 6-1
CD-M8000W
Note 1: How to open the changer manually. (Fig. 6-3)
1. In this state, turn fully the lock lever in the arrow direction through
the hole on the loading tray bottom.
2. After that, push forward the Loading tray.
Note 2:
1. After removing the connector for the optical pickup from the
connector, wrap the conductive aluminium foil around the front end
of the connector so as to protect the optical pickup from electro-
static damage.
Note 3:
1. Be careful not to break the claw of the CD mechanism.
2. When fining back the cam gear assembly, let it lock by front
movement.
Lock Lever
CD Player Unit
(Bottom View)
(B1)x2
ø3x10mm
(A1)x2
ø3x12mm
(A1)x2
ø3x12mm
(B1)x2
ø3x10mm
(B1)x4
ø3x10mm
Rear
Panel
Side Panel
(Right)
Side Panel
(Left)
Top Cabinet
Front
Panel
(C3)x1
CD Player
Unit
CD Tray Cover
(C2)x3
1
1
2
2
(E1)x1
ø3x10mm
(C1)x1
ø3x10mm
(E1)x1
ø3x10mm
(D1)x1
ø3x10mm
Lug Wire
Main PWB
Rear
Panel
Pull
(C3)x1
(C4)x2
(D1)x8
ø3x10mm
Amp.
PWB
(D2)x1
CD Servo
PWB