User manual

31
References
– Specifications –
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
■ General
Power source AC 120 V, 60 Hz
Power consumption 175 W
Dimensions Width: 7-7/8" (200 mm)
Height: 13-7/8" (352 mm)
Depth: 14-7/8" (377 mm)
Weight 21.4 lbs. (9.7 kg)
■ Amplifier
Output power 100 watts minimum RMS per channel into 6 ohms from
60 Hz to 20 kHz, 10 % total harmonic distortion
Subwoofer: 60 W/ch
(60 Hz - 200 Hz, 6 ohms, 10 % T.H.D.)
Main: 40 W/ch
(200 Hz - 20 kHz, 6 ohms, 10 % T.H.D.)
Output terminals Speakers: 6 ohms
Headphones: 16-50 ohms (recommended; 32 ohms)
Input terminals Auxiliary: 500 mV/47 kohms
■ CD player
Type 6-disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser pickup
D/A converter 1-bit D/A converter
Frequency response 20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
■ Tuner
Frequency range FM: 87.5-108.0 MHz
AM: 530-1,720 kHz
■ Speaker
Type 3-way type speaker system
2" (5 cm) Tweeter
5-1/4" (13 cm) Woofer
5-1/4" (13 cm) Subwoofer
Maximum input power (Total) 200 W
Rated input power (Total) 100 W
Impedance 6 ohms
Dimensions Width: 7-5/16" (185 mm)
Height: 16-7/16" (417 mm)
Depth: 12-1/4" (311 mm)
Weight 10.6 lbs. (4.8 kg)/each
■ Cassette deck
Frequency response 50-14,000 Hz (Normal tape)
Signal/noise ratio 50 dB (recording/playback)
Wow and flutter 0.3 % (WRMS)