Specifications

E-61
Tape Recording
CD-DV650W
CD-DV850W
ENGLISH
Recording to a cassette tape (continued)
H
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1 Press the ON/STAND-BY button to turn the power on.
2 Load a prerecorded cassette into the TAPE 1 cassette
compartment. Insert a blank tape into the TAPE 2 cassette
compartment.
It is recommended that the recording tape is the same length
as the master tape.
3 Press the TAPE (1 V 2)
button until “TAPE 1”
appears on the display.
4 Press the I6 button.
Recording will be paused.
5 Press the 0 button to start dubbing.
To stop dubbing:
Press the H (H) button.
TAPE 1 and TAPE 2 will simultaneously stop.
H
Erasing recorded tapes
1. Load the tape to be erased into the TAPE 2 cassette compartment
with the side to be erased facing towards you.
2. Press the TAPE (1 V 2) button until “TAPE 2” appears on the
display.
3. Press the I6 button.
4. Press the 0 button to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
CD-DV650W_56-61 3/21/07, 3:11 PM61
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals