Service manual

CD-DV999W/CD-DV777W
2 – 6
3.3. DVD Display Test
To display servo adjustment values, error rates, laser current, etc. during DVD playback.
1. Press the DISC 2 button on the main unit from the TEST Mode initial condition.
2. DVD starts up with “DVD” blinking on the FL display.
3. Press the Tuner/Band button to display DVD adjustment values, etc. Press it again and the display disappears and the normal screen returns.
The error rates displayed are for reference; they are not the judging criteria.
4. Press the “Power” button to cancel this mode.
DVD
Average error rate
Audio buffer space Video buffer space Number of error occurrence
Maximum error rate Laser output
FG0 TG0 TG1FG1 FBL0 TBL0 TBL1FBL1
TitleNo ChapNo
CD
When the Spin Offset Mode is never executed
Audio buffer space Video buffer space Number of error occurrence
TrNo TIME
CD
Audio buffer space Video buffer space Number of error occurrence
TrNo TIME
Sector ID
DVD
Average error rate
Audio buffer space Video buffer space Number of error occurrence
Maximum error rat Laser output
FG0
SPIN READ NG
TG0 TG1FG1 FBL0 TBL0 TBL1FBL1
TitleNo ChapNo Sector ID