Service manual

CD-DV999W/CD-DV777W
2 – 8
3.5. List of Keys Used for DVD TEST Mode and Transmit Key Codes to the Unit
Buttons used for the TEST Mode are shown above. When pressing the following DVD-related buttons, corresponding button codes are transmitted.
ON SCREEN, SURROUND, CUE, REVIEW, Curser ↑, ↓, ←, →, RETURN, ZOOM, TOP-MENU, CLEAR, RANDOM subtitle, angle, sound, DVD
MENU, Gamma, S-picture, DIRECT, DISPLAY, SET-UP.
3.6. Supplementary Note
1. Do not press buttons other than the DVD-related buttons, except for the Power button. Do not switch functions; do not control volumes.
For the electronic volume IC and the monitor output control, constantly fix the setting to DVD/CD function.
Button for System
Communication
Button Code Button Code
HEX Value
Remarks
C-PLAY Play 26h
C-PAUSE/STILL
(Remote Control)
Pause/still 29h
C-STOP (Remote control) Stop 27h
C-STOP (Main Unit) Stop 27h
SKIP-UP/CUE Skip+ 2Ch In this TEST Mode Skip+/Next button code (2Ch) is constantly transferred.
SKIP-DWN/REV Skip- 2Bh In this TEST Mode Skip-/Prev button code (2Bh) is constantly transferred.
SKIP-UP
(Remote Control)
Skip+ 2Ch
SKIP-DWN
(Remote Control)
Skip- 2Bh
REPEAT (Remote Control) Repeat 32h
A-B repeat
(Remote Control)
A-B Repeat 49h
PROGRAM
(Remote Control)
Program 1Fh
“1” key (Remote Control) 1 01h
“2” key (Remote Control) 2 02h
“3” key (Remote Control) 3 03h
“4” key (Remote Control) 4 04h
“5” key (Remote Control) 5 05h
“6” key (Remote Control) 6 06h
“7” key (Remote Control) 7 07h
“8” key (Remote Control) 8 08h
“9” key (Remote Control) 9 09h
“0” key (Remote Control) 0 0Ah
ENTER (Remote Control) Enter 70h
MENU (Remote Control) MENU 68h
SLOW> (Remote Control) SLOW> 72h