Service manual

– 13 –
CD-E700/CD-E77
Standard Specification of Stereo System Error Message Display Contents
Error Contents DISPLAY Notes
CD Pickup Mechanism Error. 'ER-CD**' 01: PU-IN SW Detection NG.
CD Changer Mechanism Error. 'ER-CD**' 10: Changer Error.
(*) 11: Initial Error.
CD DSP Communication Error 'ER-CD**' 31: DSP COMMUNICATION ERROR
Focus Not Match. 'NO DISC'
TUN PLL Unlock. FM 87.5 MHz PLL Unlock.
(*) CHECKING:
If CD changer mechanism error is detected, 'CHECKING' will be display instead of 'ER-CD**' display 'ER-CD**' will only be display
when CD changer mechanism error had been detected for the 5 th times.
Speaker abnormal detection and +B PROTECTION display
In case speaker abnormal detection or +B PROTECTION had occured, it can be check by pressing 'POWER', 'VIDEO' and 'X-
BASS' key twice. Display will show "S** B**". S is referring to speaker abnormal detection and B is referring to +B PROTECTION.
** is in hex valve.
+B PROTECTION is condition when irregular process occur on power supply line.
BEFORE TRANSPORTING THE UNIT
The following process need to be taken after set tapering/parts replacement.
1. Press the Power On Button to enter Powre mode.
2. While pressing down the
button and the X-Bass/Demo button, press the Power button until "CLEAR AL" appears
3. While pressing down the
button and the X-Bass/Demo button , press the Power button until "WAIT"
"FINISHED" appears.
4. Unplug the AC cord and the unit is ready for transporting.