CD-E800W(A) TINSE0908AWZZ MINI COMPONENT SYSTEM MODEL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. CD-E800W Mini Component System consisting of CD-E800W (main unit) and CP-E800 (speaker system). CD-E800W OPERATION MANUAL 03/8/27 CD-E800W(A)FR.
CD-E800W Special notes Important Instruction Warning: ! When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/ STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. ! This unit contains no user serviceable parts. Never remove covers unless qualified to do so.
CD-E800W(A) TINSE0908AWZZ Accessories Contents Please confirm that the following accessories are included. CD-E800W " General Information Page Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 6 " Preparation for Use System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 9 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD-E800W Precautions " General ! Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. 10 cm (4") 10 cm (4") 10 cm (4") General Information 10 cm (4") ! Use the unit on a firm, level surface free from vibration. ! Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.
Controls and indicators CD-E800W 1 1 2 12 3 4 5 6 7 8 9 13 14 15 16 17 18 19 10 11 20 21 22 23 24 25 26 27 28 29 Reference page 1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2. Timer Set Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 3. Memory/Set Button . . . . . . . . . . . . . . . . . . . . . . . . . 12, 16, 18 4. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5. Clock Button . .
CD-E800W Controls and indicators (continued) " Display 1 2 3 4 5 6 789 12 13 10 11 General Information 14 15 16 4 5 6 7 8 1 2 " Rear panel Reference page 1. Cooling Fan 2. AC Voltage Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8 4. FM 75 Ohms Aerial Terminal . . . . . . . . . . . . . . . . . . . . . . . . . 7 5. FM Aerial Earth Terminal . . . . . . . . . . . . . . . . . . . . . .
CD-E800W 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . 13, 16, 23 3. CD Memory Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4. Programme Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5. Echo Level Up and Down Buttons . . . . . . . . . . . . . . . . . . . 21 6.
CD-E800W System connections ! Aerial connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be received. FM aerial AM loop aerial Supplied AM loop aerial: Connect the AM loop aerial to the AM LOOP socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).
CD-E800W ! Speaker connection ! Connecting the AC power lead Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug the unit first, the unit will enter the demonstration mode (see page 9). Notes: " The unit will start the tape initialisation when plugged in to the AC socket.
CD-E800W System connections (continued) ! Setting the FM/AM span selector ! Demonstration mode The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll. Preparation for Use To cancel the demonstration mode: When the unit is in the power stand-by mode (demonstration mode), press the X-BASS/DEMO button. The demonstration mode will be cancelled and the display will disappear.
CD-E800W(A) TINSE0908AWZZ Remote control ! Battery installation 1 2 3 Remove the battery cover. Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the battery terminals. Replace the cover. CD-E800W Notes concerning use: " Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 "AA" size batteries (UM/ SUM-3, R6, HP-7 or similar).
CD-E800W Sound control ! Bass control Basic Operation When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra bass mode, press the X-BASS/DEMO (X-BASS) button. X-BASS indicator ! Equaliser When the EQUALIZER (EQUALIZER MODE) button is pressed, the current mode setting will be displayed.
Setting the clock CD-E800W 4 Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. 3 " Press the TUNING/TIME ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. " When the 12-hour display is selected, "AM" will change automatically to "PM". Press the TUNING/TIME ( or ) button to adjust the minutes and then press the MEMORY/SET button. In this example, the clock is set for the 24-hour (0:00) display.
CD-E800W Listening to a CD (CDs) This system can also play audio CD-R and CD-RW discs, but cannot record. Some audio CD-R and CD-RW discs may not be playable due to the state of disc or the device that was used for recording. 4 Place the CD(s) on the disc tray, label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position. " CDs can be placed on any open position on the disc tray.
CD-E800W ! To locate the beginning of a track button. To stop playback: Press the button. To remove the CDs: Whilst in the stop mode, press the OPEN/CLOSE button. The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to rotate the disc tray and remove the remaining disc. Caution: " Do not place two CDs in one disc tray. " Do not play discs with special shapes (heart- or octagonshaped). It may cause malfunctions. " Do not push the disc tray whilst it is moving.
CD-E800W Advanced CD playback ! Direct search of the track ! Repeat play By using the direct search buttons, the desired tracks can be played. All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. 1 Whilst in the stop mode, press one of the 1 - 3 buttons on the remote control or DISC SKIP button to select the desired disc. 2 Use the direct search buttons on the remote control to select the desired track.
CD-E800W You can choose up to 32 selections for playback in the order you like. 1 2 Whilst in the stop mode, press one of the 1 - 3 buttons on the remote control to select the desired disc. Selected disc number Press the direct search buttons on the remote control to select the desired track. Selected track number You can also select a track by pressing the or button. 3 Press the MEMORY/SET (MEMORY) button to save the track number.
CD-E800W Listening to the radio 3 Press the TUNING/TIME ( or ) button to tune in to the desired station. Manual tuning: Press the TUNING/TIME button as many times as required to tune in to the desired station. Auto tuning: When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Radio Notes: " When radio interference occurs, auto scan tuning may stop automatically at that point.
CD-E800W ! Memorising a station ! To recall a memorised station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) Press the PRESET ( or ) button for less than 0.5 seconds to select the desired station. This can be operated by pressing the TUNER PRESET ( or ) button on the remote control. Perform steps 1 - 3 in "Tuning" on page 17. Press the MEMORY/SET button to enter the preset tuning saving mode.
CD-E800W Listening to a cassette tape (TAPE 1) Tape Playback Before playback: " For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended.) " Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. " Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. 1 2 3 Press the ON/STAND-BY button to turn the power on.
Listening to a cassette tape (TAPE 2) CD-E800W Load a cassette into the TAPE 2 cassette compartment with side A facing you. 5 Press the button to choose one side or both sides. 6 ... To listen to both sides. ... For endless repeat play of both sides. ... To listen to one side. 6 Press the ( ) button to listen to side A, or the [(TAPE-2) ] button for side B. To play both sides ( ), start from side A. When playback starts from side B, side A will not be played. To stop playback: Press the button.
CD-E800W Playing karaoke You can enjoy karaoke to CDs, radio, cassettes, and other external devices by connecting a separately available microphone to this unit. 3 4 Press the ON/STAND-BY button to turn the power on. 5 Adjust the volume of the audio source using the VOLUME control. 6 Turn the MIC LEVEL control towards MAX to increase the microphone volume and towards MIN to decrease it.
CD-E800W Sound of the playback source can be switched among the STEREO, L-CH, R-CH, and V-CANCEL (VOCAL CANCEL) modes. The audio mode function is used when the left and right channels have individual signals from each other. Press the KARAOKE MODE button on the remote control until the desired audio mode is displayed. Each time the KARAOKE MODE button is pressed, the mode will change as follows: STEREO L-CH R-CH V-CANCEL STEREO Sounds on the left and right channels are played.
CD-E800W Recording to a cassette tape Tape Recording Before recording: ! When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. ! SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. ! The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). ! For recording, use only normal tapes. Do not use metal or CrO tapes.
CD-E800W " Dubbing from tape to tape You can record from TAPE 1 to TAPE 2. 1 2 Press the ON/STAND-BY button to turn the power on. " Recording from the radio Load a prerecorded cassette into the TAPE 1 cassette compartment. Insert a blank tape into the TAPE 2 cassette compartment. It is recommended that the recording tape is the same length as the master tape. 1 2 Tune in to the desired station. (See page 17.) 3 Load a cassette into the TAPE 2 cassette compartment with side A facing you.
CD-E800W Timer and sleep operation Timer playback: The unit turns on and plays the desired source (CD, tuner, tape) at the preset time. Timer recording: The unit turns on and starts recording from the tuner at the preset time. " Timer playback or timer recording Before setting timer: 1 2 Advanced Features Sleep operation: The radio, compact disc and cassette tape can all be turned off automatically. Press the CLOCK button to check that the clock is set to the correct time. (Refer to page 12.
CD-E800W Press the TUNING/TIME ( or ) button to specify the hour to start, then press the MEMORY/SET button. The illustrations show the timer playback setting. 6 Press the TUNING/TIME ( or ) button to specify the minutes, then press the MEMORY/SET button. To reset or change the timer setting: Perform "Timer playback or timer recording" from the beginning. Note: When performing timer playback or recording using another unit connected to the VIDEO/AUX IN sockets, select "VIDEO/AUX" in step 2.
CD-E800W Timer and sleep operation (continued) ! Sleep operation 1 2 Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed. ! To use timer and sleep operation together Example: To fall asleep and wake up to the same radio station You can play back the same source only (the function cannot be switched). Advanced Features 1 2 To change the sleep time: Whilst the sleep time is displayed, press the TUNING/TIME ( or ) button.
Enhancing your system CD-E800W The connection lead is not included. Purchase a commercially available lead as shown below. VCR, DVD, etc. To the line output sockets 1 Insert a cassette in the TAPE 2 cassette compartment. 2 Press the VIDEO/AUX button. 3 Press the REC PAUSE (TAPE-2 4 Press the 5 Play the VCR, DVD, etc. ( ) or [(TAPE-2) ) button. ] button. Red ! Headphones Red White RCA lead (not supplied) " Before plugging in or unplugging the headphones, reduce the volume.
CD-E800W Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. References ! General Symptom Possible cause " The clock is not set to the " Did a power failure occur? Reset correct time. the clock. (Refer to page 12.) " When a button is pressed, " Set this unit to the power standthe unit does not respond.
CD-E800W ! Karaoke Symptom " The vocal part of a multiplexed disc is not heard. ! Clearing all the memory (reset) Possible cause " Is the karaoke mode set to "LCH", "R-CH" or "V-CANCEL"? 1 2 Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the button and the X-BASS/DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears.
CD-E800W Maintenance Specifications ! Cleaning the tape-handling parts As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. " Dirty heads, capstans or pinch rollers can cause poor sound and tape jams.
CD-E800W ! CD player D/A converter Frequency response Dynamic range 3-disc multi-play compact disc player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter 20 - 20,000 Hz Type 90 dB (1 kHz) Maximum input power Rated input power Impedance Dimensions ! Tuner Frequency range FM: 88 - 108 MHz AM: 531 - 1,602 kHz ! Cassette deck Frequency response Signal/noise ratio Wow and flutter Weight 3-way 4-speaker system with passive radiator Super tweeter 2 5 cm (2") tweeter 16 cm (6-1/2") woo
MEMO 03/8/27 CD-E800W(A)MEMO.
WARRANTY Consumer Electronic Products Congratulations on Your Purchase! This Sharp product is warranted against faults in materials and manufacture for a period of twelve (12) months from the date of original purchase. If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre. These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
IMPORTANT DO NOT RETURN THIS PAGE TO SHARP For your reference, please enter the particulars of your purchase below and retain, with your purchase documentation. Model No. Serial No. Date of Purchase Retailer FOR LOCATION ENQUIRIES WITHIN FOR PRODUCTS PURCHASED IN AUSTRALIA NEW ZEALAND REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.