Specifications

31
CD-E800W
03/8/27 CD-E800W(A)3.fm
TINSE0908AWZZ
References
Maintenance
! Cleaning the tape-handling parts
"
Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
"
When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
"
After long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
! Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
"
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
"
Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
! General
! Amplifier
Playback head Erase head
Capstan Recording/Playback head
Pinch roller
TAPE 1
TAPE 2
A
C
CC
D
E
B
BB
Power source AC 110/127/220/230 - 240 V, 50/60 Hz
Power
consumption
140 W
Dimensions Width: 270 mm (10-5/8")
Height: 330 mm (13")
Depth: 355 mm (13-15/16")
Weight 8.8 kg (19.4 lbs.)
Output power MPO: 620 W (310 W + 310 W) (10 % T.H.D.)
RMS: 340 W (170 W + 170 W) (10 % T.H.D.)
RMS: 280 W (140 W + 140 W) (0.9 %
T.H.D.)
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Input terminals Video/Auxiliary (audio signal): 500 mV/47 k
ohms
Microphone: 1 mV/600 ohms