VIDEO CD MINI SYSTEM MINI-CHAÎNE CD VIDÉO SISTEMA MINI VÍDEO CD CD-ES600V Video CD Mini System consisting of CD-ES600V (main unit) and CP-ES600V (speaker system). Mini-chaîne CD vidéo CD-ES600V composée de CD-ES600V (appareil principal) et de CP-ES600V (enceinte acoustique). Sistema mini vídeo CD CD-ES600V que consta de CD-ES600V (aparato principal) y CP-ES600V (sistema de altavoces).
ENGLISH CD-ES600V ENGLISH Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Important Instruction Special notes Warning: ! When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/ STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control.
1 Accessories Contents Please confirm that the following accessories are included. CD-ES600V " General Information Page ENGLISH Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 7 " Preparation for Use Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD-ES600V ENGLISH Precautions " General ! Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. 10 cm (4") 10 cm (4") 10 cm (4") Warning: The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage.
Controls and indicators CD-ES600V 1 2 3 4 5 17 18 19 6 7 20 21 22 23 8 9 10 24 11 12 13 14 15 25 26 27 16 28 29 30 31 32 33 34 Reference page 1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 3. Video CD Playback Control Button . . . . . . . . . . . . . . . . . . 20 4. Video CD On Screen Display On/Off Button . . . . . . . . . . . 25 5. On/Stand-by Button . .
CD-ES600V Controls and indicators (continued) ENGLISH " Display 10 11 General Information 12 13 1 2 3 4 5 6 7 8 9 Reference page 1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2. Disc Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3. Disc Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5.
CD-ES600V ENGLISH " Rear panel 2 4 5 6 7 8 9 General Information 1 Reference page 1. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2. AC Voltage Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 12 4. FM 75 Ohm Aerial Terminal . . . . . . . . . . . . . . . . . . . . . . . 9, 10 5. FM Aerial Earth Terminal . . . . . . . . . . . . . . . . . . . . . . .
CD-ES600V Controls and indicators (continued) ENGLISH " Remote control 1 2 17 18 19 General Information 3 4 5 6 7 8 9 10 11 12 13 14 15 16 20 21 22 23 26 29 24 27 30 31 25 28 Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . 8 2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 18 3. Echo Level Up and Down Buttons . . . . . . . . . . . . . . . . . . . 33 4. Karaoke Mode Button . . . . . . . . . . . . . . . . . . . . . . .
Remote control " Battery installation 1 2 3 Remove the battery cover. Insert the supplied batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the battery terminals. Replace the cover. CD-ES600V Notes concerning use: ! Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 "AA" size batteries (UM/ SUM-3, R6, HP-7 or similar).
CD-ES600V System connections ENGLISH Make sure to unplug the AC power lead before any connections. Aerial connection (see page 10) AM loop aerial FM aerial Right speaker Preparation for Use Left speaker Speaker connection (see page 10) To a wall socket AC power connection (see page 12) E-9 04/2/23 Downloaded From Disc-Player.com Sharp Manuals CD-ES600V(Z)E1.
CD-ES600V ENGLISH " Aerial connection " Speaker connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal can be received. Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. Supplied AM loop aerial: Connect the AM loop aerial to the AM LOOP socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc.
CD-ES600V ENGLISH System connections (continued) ! Placing the speaker system ! TV/monitor connection The left and right speakers have individual shapes. For best performance, place the speakers according to the diagram below. If the TV/monitor has a video input, connect it to the VIDEO OUT socket on the rear of the unit. Left speaker Right speaker Preparation for Use TV Notes: " The speakers are magnetically shielded. Therefore, they do not affect the display even you use them near the TV.
CD-ES600V ENGLISH ! AC power connection 1 After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug the unit first, the unit will enter the demonstration mode (see page 13). 2 ! Setting the AC voltage selector AC Plug Adaptor In areas (or countries) where a wall socket as shown in illustration is used, connect the unit using the AC plug adaptor supplied with the unit, as illustrated.
CD-ES600V ENGLISH System connections (continued) ! Setting the FM/AM span selector ! Demonstration mode Preparation for Use The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll. To cancel the demonstration mode: When the unit is in the power standby mode (demonstration mode), press the X-BASS/DEMO button. The demonstration mode will be cancelled and the display will disappear.
General control CD-ES600V ENGLISH ! Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease. 0 ..... 30 MAXIMUM Remote control operation: Press the VOL (+ or -) button to increase or decrease the volume. When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS" will appear.
CD-ES600V Setting the clock ENGLISH 5 Press the or button to adjust the hour and then press the MEMORY/SET button. Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. 6 Press the or button to adjust the minutes and then press the MEMORY/SET button. Basic Operation In this example, the clock is set for the 24-hour (0:00) display. 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the CLOCK/TIMER button.
Video CD CD-ES600V Size Label sides Audio recording format Video recording format This unit handles video CDs that support PBC (version 2.0). (PBC is an abbreviation of "Playback control".) You can enjoy the following two types of playback, depending on the disc. Disc type Video CDs without PBC (version 1.1) Video CDs with PBC (version 2.0) Symbol 8 cm (3") 1 side Digital (max. 20 min) MPEG 1 12 cm (5") 1 side Digital (max.
CD-ES600V ENGLISH Preparation for video CD playback 1 ! Adjusting the TV and VCR ! Selecting the video output format The TV or VCR input varies according to the connection method. Be sure to make the settings correctly. (Then, follow the playback procedure on page 18 to check the settings.) Video CD is recorded in PAL or NTSC format. Select the video output format (NTSC or PAL) according to your TV or VCR. To select the video output format: Whilst in the stop mode, press the PAL/NTSC button.
Video CD playback 2 Playback control: Video CDs that support "Playback control" can display still pictures. This function can be used with video CD software (video CDs with playback control) that have a playback method recorded on them. You can select items you want to watch from the menu displayed on the TV screen, or you can show still pictures. CD-ES600V ENGLISH ! Playback 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Place the disc on the disc tray 1, label side up.
CD-ES600V Video CD playback (continued) Disc Playback ENGLISH Notes: " Whilst the disc is being read ("TOC READ" is displayed), you cannot play another disc. The 1 - 5 buttons work, but the / ( SELECT/RESUME) button does not. " Playback control allows a video CD to be played back according to instructions recorded on the disc. The "previous", "next", "return" and "select" operations may function differently, depending on the PBC CDs.
CD-ES600V Notes: " Operations may be different from the above in the P.B.C. mode. " Pictures are shown intermittently and no sound is heard during fast forward or fast reverse on video CDs. " During fast forward/fast reverse, no sound is produced. Images may be distorted or become noisy, or discolouration may occur. ! To move the menu screen (menu screen with more than 1 page) (Video CD with P.B.C. only) ! Playback of a video CD (CDs) with P. B. C. (Version 2.
CD-ES600V ENGLISH Advanced video CD playback ! To specify a disc to play ! Direct track search You can play a disc by specifying the disc number. By using the direct search buttons, the desired tracks on the current disc can be played. 1 Press one of the 1- 5 buttons to select the desired disc. Use the direct search buttons on the remote control to select the desired track whilst playing the selected disc.
CD-ES600V ENGLISH ! To create a bookmark This function marks the desired scene on the video CD to play it back easily. (Up to 9 scenes per disc can be marked.) Whilst in the playback mode, press the BOOKMARK button on the remote control when the desired scene is displayed. "B-M" will appear on the TV screen for a few seconds. 1 B-M 2 Repeat step 1. " Up to 9 scenes can be marked. " If more than 9 bookmarks are created, bookmarks will be erased in the order they were created.
CD-ES600V ENGLISH Advanced video CD playback (continued) ! Time search selection ! Disc digest selection You can play back from the desired scene by specifying the time. You can play back a desired track by selecting one from the 9 displayed tracks on the screen. 1 Whilst in the playback mode, hold down the DIGEST (DIGEST/TIME SEARCH) button to enter the time search mode. 1 GO TO Disc Playback 2 Whilst in the stop mode, press the DIGEST (DIGEST/TIME SEARCH) button.
CD-ES600V ENGLISH Each track is divided into 9 sections. You can look at the sections and select the scene you want to start watching from. This function is convenient when you want to start from the middle of an undivided track, for example, a movie. 1 During playback, press the DIGEST (DIGEST/TIME SEARCH) button. " The track being played back will be divided into 9 sections and playback will be paused. " Each time a divided section is displayed, you can hear the first several seconds of the section.
CD-ES600V ENGLISH Advanced video CD playback (continued) ! To play back the video CD manually ! Changing the TV screen display Usually this unit detects the video CD and plays back pictures and sounds. In case this unit fails to judge it correctly, you can play back the video CD manually. You can check the operation of the main unit by the on-screen display. 1 Press the VCD AUTO/VCD button until "VCD ON" appears on the TV screen.
CD playback CD-ES600V This system can also play audio CD-R and CD-RW discs, but cannot record. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the equipment used for recording. The following playback functions are the same as video CD operations. Page Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Various disc functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 To specify a disc to play . . . . .
CD-ES600V ENGLISH CD playback (continued) ! Programmed play You can choose up to 32 selections for playback in the order you like. 1 Disc Playback 2 Whilst in the stop mode, press the MEMORY/SET (MEMORY) button to enter the programming save mode. To cancel the programmed play mode: Whilst in the stop mode and the "MEMORY" indicator is lit, press the CLEAR/DIMMER button on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be cleared.
CD-ES600V ! To select the desired folder or track by name (MP3 discs only) 1 Whilst in the stop mode, press the DISPLAY button to display the folder name. 2 3 Select the desired folder by pressing the 4 5 Select the desired track by pressing the ! To change the display (MP3 discs only) Whilst in the stop mode or playback mode, press the DISPLAY button. Each time the button is pressed, the display will change as follows. [When in the stop mode] Total number of tracks Folder name or button.
CD-ES600V Listening to the radio ENGLISH ! Tuning 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING ( station. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). or ) button to tune in to the desired Radio Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for more than 0.
CD-ES600V ! Memorising a station ! To recall a memorised station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) Press the PRESET ( or lect the desired station. 1 2 Perform steps 1 - 3 in "Tuning" on page 29. Press the MEMORY/SET (MEMORY) button to enter the preset tuning saving mode. The stations saved in memory can be scanned automatically.
CD-ES600V Listening to a cassette tape (TAPE 1 or TAPE 2) ENGLISH Tape Playback Before playback: " For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended.) " Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. " Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. ! Tape 1 playback 1 2 3 Press the ON/STAND-BY button to turn the power on.
CD-ES600V 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Load a cassette into the TAPE 2 cassette compartment with side A facing you. 5 Press the button to choose one side or both sides. ... To listen to both sides. To play both sides ( ), start from side A. When playback starts from side B, side A will not be played. ... For endless repeat play of both sides. ... To listen to one side. 6 Press the TAPE (1 2) button to select TAPE 2.
CD-ES600V Playing karaoke You can enjoy karaoke to video CDs, CDs, MP3 Discs, radio, cassettes, and other external devices by connecting a separately available microphone to this unit. 3 4 Press the ON/STAND-BY button to turn the power on. 5 Adjust the volume of the audio source using the VOLUME control. 6 To control the volume of both microphones, turn the MIC LEVEL control towards MAX to increase and towards MIN to decrease.
CD-ES600V ENGLISH ! To change the audio mode 3 Sound of the playback source can be switched among the STEREO, L-CH, R-CH, and V-CANCEL (VOCAL CANCEL) modes. The audio mode function is used when the left and right channels have individual signals from each other. Press the KARAOKE MODE button on the remote control until the desired audio mode is displayed. Each time the KARAOKE MODE button is pressed, the mode will change as follows: STEREO L-CH R-CH V-CANCEL Notes: " Use discs recorded in stereo.
CD-ES600V Recording on a cassette tape ENGLISH Before recording: " When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. " SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. " The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). " For recording, use only normal tapes. Do not use metal or CrO tapes.
CD-ES600V You can record the desired disc using the DIRECT PLAY button. 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Press the Press the CD/VIDEO CD (CD) button. Load a cassette into the TAPE 2 cassette compartment with side A facing you. Wind past the leader of the tape, on which recording cannot be performed. button to choose one side or both sides. ... To record on both sides. ... To record on only one side.
CD-ES600V ENGLISH Recording on a cassette tape (continued) ! Recording from the radio 1 2 Tune in to the desired station (see page 29). 3 Press the Load a cassette into the TAPE 2 cassette compartment with side A facing you. Wind past the leader of the tape, on which recording cannot be performed. Tape Recording Press the You can record from TAPE 1 to TAPE 2. 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TAPE (1 2) button until "TAPE 1" appears on the display.
Timer and sleep operation CD-ES600V ENGLISH Timer playback: The unit turns on and plays the desired source (video CD, CD, MP3 disc, tuner, tape) at the preset time. Timer recording: The unit turns on and starts recording from the tuner at the preset time. This unit has 2 types of timer: ONCE TIMER and DAILY TIMER. Once timer play or once timer recording works for one time only at a preset time. For example, if you are away but want to record a programme on a radio station.
CD-ES600V Timer and sleep operation (continued) ENGLISH 4 Within 10 seconds, press the or button to select "ONCE SET" or "DAILY SET", and press the MEMORY/ SET button. 5 Press the or button to select "PLAY" or "REC", and press the MEMORY/SET button. Advanced Features White Red 9 Switch input with the or button, and then press the MEMORY/SET button. To select the timer playback source: CD/VIDEO CD, TUNER, TAPE 1 or TAPE 2. To select the timer recording source: TUNER.
CD-ES600V ENGLISH start. The volume will increase gradually until it reaches the preset volume. 13 When the timer end time is reached, the system will enter the power stand-by mode automatically. Once timer: The timer will be cancelled. Daily timer: The timer will operate at the same time every day. It will continue until the daily timer setting is cancelled. Cancel the daily timer when it is not in use.
CD-ES600V ENGLISH Timer and sleep operation (continued) ! Sleep operation Advanced Features The radio, compact disc and cassette tape can all be turned off automatically. 1 2 3 Play back the desired sound source. 4 Press the Press the CLOCK/TIMER button. Within 10 seconds, press the or button to select "SLEEP", and press the MEMORY/SET button. or button to select the time.
Enhancing your system The connection lead is not included. Purchase a commercially available lead as shown below. Game system, VCR, DVD player, etc. CD-ES600V ! Listening to sounds of game, VCR, DVD, etc. 1 Connect a video game system, VCR, DVD, etc. to the front GAME INPUT (VIDEO, AUDIO L and R) sockets. 2 Connect a TV to the rear VIDEO OUT socket. ENGLISH Yellow White 3 Press the ON/STAND-BY button to turn the power on. 4 Press the GAME/VIDEO button. 5 Play the connected equipment.
Troubleshooting chart CD-ES600V ENGLISH Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. ! General Symptom Possible cause " The clock is not set to the " Did a power failure occur? Reset correct time. the clock. (Refer to page 15.) Advanced Features " When a button is pressed, " Set the unit to the power standthe unit does not respond.
CD-ES600V Symptom Possible cause " Playback does not start. " Is the disc loaded upside down? " Playback stops in the mid- " Does the disc satisfy the standle or is not performed dards? properly. " Is the disc distorted or scratched? " Playback sounds are " Is the unit located near excessive skipped, or stopped in the vibrations? middle of a track. " Is the disc very dirty? " Has condensation formed inside the unit? ! Cassette deck Symptom " Cannot record.
Maintenance CD-ES600V ENGLISH ! If trouble occurs References When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. ! Cleaning the tape-handling parts " Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol.
Specifications ! General Power source Power consumption Dimensions Weight AC 110/127/220/230 - 240 V, 50/60 Hz 120 W Width: 260 mm (10-1/4") Height: 330 mm (13") Depth: 326 mm (12-7/8") 8.7 kg (19.2 lbs.) Output terminals Input terminals MPO: 450 W (225 W + 225 W) (10 % T.H.D.) RMS: 240 W (120 W + 120 W) (10 % T.H.D.) RMS: 180 W (90 W + 90 W) (0.9 % T.H.D.
DOWN UP CD-ES600V Downloaded From Disc-Player.
