CD-ES9(U) TINSEA055AWZZ Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. CD-ES9 Mini Component System consisting of CD-ES9 (main unit) and CP-MPS99 (speaker system). MINI COMPONENT SYSTEM MODEL CD-ES9 OPERATION MANUAL Accessories Please confirm that the following accessories are included.
CD-ES9 SPECIAL NOTES Important Instruction CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CD-ES9(U) TINSEA055AWZZ IMPORTANT SAFETY INSTRUCTIONS be read before the product is operated. 2 Retain Instructions - The safety and operating instructions should be retained for future reference. 3 Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4 Follow Instructions - All operating and use instructions should be followed.
Important Instruction CD-ES9 IMPORTANT SAFETY INSTRUCTIONS (continued) 15 Outdoor Antenna Grounding - If an outside antenna or cable system 19 Object and Liquid Entry - Never push objects of any kind into this is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Contents Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efficiency. Page General Information Preparation for Use Basic Operation CD Playback Radio Tape Playback Tape Recording Advanced Features References Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 9 System connections . .
CD-ES9 Precautions General Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 4" (10 cm) of free space along the sides, top and back of the equipment. 4" (10 cm) 4" (10 cm) 4" (10 cm) Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can damage internal wires. Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.
Controls and indicators CD-ES9 13 1 2 3 4 14 15 16 5 6 7 17 18 8 20 9 10 21 19 22 11 1 Front panel Reference page 1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 3. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 14 4. CD Track Up or Fast Forward, Tape 2 Fast Forward, Tuner Preset Up, Time Up Button . . . . . . . . . . .
CD-ES9 Controls and indicators (continued) 1 2 34 5 6 7 8 General Information 12 9 10 11 13 14 15 3 4 5 6 1 7 Display Rear panel Speaker system Reference page 1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2. CD Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3. CD Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . .
CD-ES9 1 2 13 14 3 4 5 6 7 8 9 10 11 12 15 16 17 18 19 20 1 Remote control Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 13 2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 16 3. Disc Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 18 4. CD Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . . 14, 20 5. Memory/Set Button . . . . . . . . . . . . . . . . . . . 15, 20, 22, 27, 30 6.
CD-ES9 System connections Make sure to unplug the AC power cord before any connections. Antenna connection (see page 11) AM loop antenna FM antenna Right speaker Preparation for Use Left speaker Speaker connection (see page 11) AC outlet (AC 120 V, 60 Hz) AC power connection (see page 12) 10 04/1/19 CD-ES9(U)1.
CD-ES9(U) TINSEA055AWZZ 3 CD-ES9 Antenna connection Supplied FM antenna: Connect the FM antenna wire to the FM 75 OHMS terminal and position the FM antenna wire in the direction where the strongest signal can be received. Speaker connection Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. Supplied AM loop antenna: Connect the AM loop antenna to the AM LOOP jack. Position the AM loop antenna for optimum reception.
System connections (continued) AC power connection After checking all the connections have been made correctly, plug the AC power cord of this unit into the AC outlet. If you plug in the unit first, the unit will enter the demonstration mode. Preparation for Use Downloaded from: http://www.usersmanualguide.com/ CD-ES9 Demonstration mode The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.
Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included. 1 2 3 Remove the battery cover. Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them toward the battery terminals. Replace the cover. CD-ES9 Notes concerning use: Replace the batteries if the operating distance is reduced or if the operation becomes erratic.
CD-ES9 General control Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned counterclockwise, the volume will decrease. Remote control operation: 0 ..... 30 MAXIMUM Press the VOLUME (+ or -) button to increase or decrease the volume. Bass control Basic Operation When the power is first turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and "XBASS" will appear.
Setting the clock CD-ES9 5 or button to adjust the hour and then Press the press the MEMORY/SET button. 3 Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. In this example, the clock is set for the 12-hour (AM 12:00) display. 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the CLOCK/TIMER button. or button to seWithin 10 seconds, press the lect "CLOCK", and press the MEMORY/SET button.
CD-ES9 Listening to a CD (CDs) This system can play audio CDs, and CD-R/RW discs but cannot record CDs. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the device that was used for recording. CD playback 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Place the CD on the disc tray 1, label side up. Press the CD button. Press the 1 button and within 5 seconds, press the OPEN/CLOSE button to open the disc tray 1.
CD-ES9 Playback will begin from track 1 on DISC 1. After that disc finishes playing, the next disc will automatically play. After the last track on the fifth disc is played, the CD player stops automatically. When there is no CD in one of the disc trays (1 - 5), the empty tray will be skipped to the next tray with a CD. To exchange other CDs while playing a disc: Press one of the 1 - 5 buttons for the stopped disc and within 5 seconds, press the OPEN/CLOSE button and exchange discs.
CD-ES9 Advanced CD playback To specify a disc to play You can play a disc by specifying the disc number. 1 Press one of the 1- 5 buttons to select the desired disc. Direct track search By using the direct search buttons, the desired tracks on the current disc can be played. Use the direct search buttons on the remote control to select the desired track while playing the selected disc.
CD-ES9 Repeat play Repeat play can play all 5 discs, all tracks on a chosen disc, or a programmed sequence continuously. To repeat all tracks on up to 5 discs: Press the / Random play The tracks on the disc(s) can be played in random order automatically. To random play all tracks on up to 5 discs: Press the RANDOM button on the remote control. button twice. 4 To repeat desired tracks: Perform steps 1 - 6 in the "Programmed play" section on page 20 and then press the / button twice.
CD-ES9 Advanced CD Playback (continued) Programmed play You can choose up to 32 selections for playback in the order you like. 1 CD Playback 2 While in the stop mode, press the MEMORY/SET (MEMORY) button to enter the programming save mode. To cancel the programmed play mode: While in the stop mode and the "MEMORY" indicator is lit, press the CLEAR/DIMMER button on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be cleared.
Listening to the radio CD-ES9 Tuning 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING ( station. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). or ) button to tune in to the desired 5 Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. When the TUNING button is pressed for more than 0.
CD-ES9 Listening to the radio (continued) Memorizing a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 2 Perform steps 1 - 3 in "Tuning" on page 21. Press the MEMORY/SET (MEMORY) button to enter the preset tuning saving mode. Radio Within 30 seconds, press the PRESET ( select the preset channel number. or ) button for less than 0.
Listening to a cassette tape (TAPE 1 or TAPE 2) Tape playback Before playback: For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended.) Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. 1 2 Press the ON/STAND-BY button to turn the power on.
Recording on a cassette tape CD-ES9 Various tape functions Function Tape Playback Play Main unit Remote control Before recording: Operation Press in the stop mode. When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor).
CD-ES9 Recording from a CD (CDs) You can record the desired CD using the DIRECT PLAY button. 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the CD button. Load a cassette into the TAPE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. Press the button. Recording will be paused. 5 6 Press one of the 1- 5 buttons to select the desired disc.
CD-ES9 Recording on a cassette tape (continued) Recording from several CDs continuously: 1 Perform steps 1 - 5 in "Recording from a CD (CDs)" on page 25. 2 Within 5 seconds, press the / . To perform programmed recording: 1 Program discs and tracks. (See page 20.) 2 Press the button. 3 Press the / . 1 2 Tape Recording To stop recording: Press the button. The CD and tape will stop. 1 2 4 Press the ON/STAND-BY button to turn the power on.
Timer and sleep operation CD-ES9 Timer playback: The unit turns on and plays the desired source (CD, tuner, tape) at the preset time. Timer recording: The unit turns on and starts recording from the tuner at the preset time. This unit has 2 types of timer: ONCE TIMER and DAILY TIMER. Once timer play and once timer recording works for one time only at a preset time. For example, if you are away but want to record a program on a radio station.
CD-ES9 Timer and sleep operation (continued) 4 or button to seWithin 10 seconds, press the lect "ONCE SET" or "DAILY SET", and press the MEMORY/ SET button. 9 or Switch input with the press the MEMORY/SET button. button, and then To select the timer playback source: CD, TUNER, TAPE 1 or TAPE 2. To select the timer recording source: TUNER. 5 Press the or button to select "PLAY" or "REC", and press the MEMORY/SET button.
CD-ES9 start. The volume will increase gradually until it reaches the preset volume. 13 When the timer end time is reached, the system will enter the power stand-by mode automatically. Once timer: The timer will be canceled. Daily timer: The timer will operate at the same time every day. It will continue until the daily timer setting is canceled. Cancel the daily timer when it is not used.
CD-ES9 Timer and sleep operation (continued) Sleep operation The radio, compact disc and cassette tape can all be turned off automatically. Advanced Features 1 2 3 4 Play back the desired sound source. Press the CLOCK/TIMER button. Within 10 seconds, press the or button to select "SLEEP", and press the MEMORY/SET button. Press the or button to select the time.
Enhancing your system CD-ES9 The connection cord is not included. Purchase a commercially available cord as shown below. 1 Connect a video game system, VCR, DVD, etc. to the front GAME INPUT (VIDEO, AUDIO L and R) jacks. 2 Connect a TV to the rear VIDEO OUT jack. GAME or VCR, DVD, etc. Switch the TV input to auxiliary. 3 4 5 Yellow Press the GAME/VIDEO button. Play the connected equipment. You can enjoy sounds from the supplied speakers and images on the TV.
Troubleshooting chart CD-ES9 Headphones Before plugging in or unplugging the headphones, reduce the volume. Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms. Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME control. Many potential problems can be resolved by the owner without calling a service technician.
CD-ES9 Cassette deck Symptom Cannot record. Cannot record tracks with proper sound quality. Cannot erase completely. Cannot hear treble. Sound fluctuation. Cannot remove the tape. Sound skipping. Possible cause Is the erase-prevention tab removed? Symptom Symptom The radio makes unusual noises continuously. Is it a normal tape? (You cannot record on a metal or CrO tape.
Maintenance Cleaning the tape-handling parts CD-ES9 Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour).
Specifications General Power source Power consumption Dimensions Weight Width: 10-1/4" (260 mm) Height: 13" (330 mm) Depth: 12-7/8" (326 mm) 22.9 lbs. (10.
CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.